ActiveLot OBD Module User’s Guide
Confidential & Proprietary Information of KeyTrak, Inc. © 2014 1
Overview
The ActiveLot OBD Module gathers information from the vehicle along with the GPS location
and transmits it back to the ActiveLot system. While the vehicle is running, it will transmit
once every five seconds. While the vehicle is off, it will initiate a transmission cycle once
every hour.
For help with installation procedures, or if you have any questions, contact:
KeyTrak Support
1-800-541-5033
FCC Warnings
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
To Next Page
Need help?
General
