Step 3: Take out the speaker.
Step 4: Tilt the speaker and place the spike disc
underneath the spikes.
Step 2: remove side panel
Note that only one of the side panels of the crate
can be unscrewed.
The easiest way to place the spike disc is to tilt the spea-
ker sideways to one side and position the front and back
spike disc and then tilt the speaker sideways to the other
side to position the other two spike discs.
Step 5: place the goldplated kharma logos
Important
The stainless steel spikes can be very sharp and can damage your oor. It is adviced to protect
your oor with a piece of foam or thin piece of wood when the spike discs are not yet placed.
Important
To prevent your speaker from getting damaged it is important to place some thick foam
on the oor before taking out the loudspeaker. You can use the lid of the crate for this.
8 9
To Next Page
Loading...