3
Tools
Please see the list below to identify the tools needed throughout this tech manual. Always
check tools to ensure the ends are not stripped and that the tool can perform its function
properly without damaging any parts or hardware on the chair.
Tools Needed
• 2.5mm Allen Wrench • Two 8mm Wrenches
• 3mm Allen Wrench • Two 10mm Wrenches
• 4mm Allen Wrench • 13mm Wrench
• 5mm Allen Wrench • 17mm Wrench
• 5.5mm Allen Wrench • 19mm Wrench
• 6mm Allen Wrench • 24mm Wrench
• Utility blade • Phillips Screwdriver
To Next Page
Loading...