Kia 2016 Cadenza - Instrument Cluster Control; LCD Display Control

453
Features of your vehicle
Instrument Cluster Control
Adjusting Instrument Cluster
Illumination
The brightness of the instrument
panel illumination is changed by
pressing the illumination control button
("+" or "-") when the ignition switch or
Engine Start/Stop button is ON, or the
tale lights are turned on.
• If you hold the illumination control
button ("+" or "-"), the brightness
will be changed continuously.
• If the brightness reaches to the
maximum or minimum level, an
alarm will sound.
LCD Display Control
The LCD display modes can be
changed by using the control buttons
on the steering wheel.
(1) : MODE button for changing
modes or SELECT button
for setting the selected item
(2) : MOVE button for changing
items or RESET button for
resetting the selected item
❈ For the LCD modes, refer to “LCD
Display” in this chapter.
OVG043052
OXM043124
OVG043302E
OVG043303E
■ Type A
■ Type B