Kia Carnival MPV 2024

To Next Page

The 2024 Kia Carnival MPV.

Vehicle Feature Tips

ManyoftheTipspresentedbelowarecoveredingreaterdetailinthe

Owner’sManual,MultimediaSystemManuals,FeaturesandFunctions

Guide,andQuick-StartGuidehangtagsuppliedwithyournewvehicle.

Vehicle Feature Tips

ManyoftheTipspresentedbelowarecoveredingreaterdetailinthe

Owner’sManual,MultimediaSystemManuals,FeaturesandFunctions

Guide,andQuick-StartGuidehangtagsuppliedwithyournewvehicle.

Voice Recognition

and Bluetooth

®2

Using Voice Recognition

ImproveBluetooth

VoiceRecognition(VR)performance

bymakingafewsimplechangestoyourphonecontacts:

•Usefullnames(firstandlastnames)vs.shortorsingle-

syllablenames(“JohnSmith”vs.“Dad,”“SmithResidence”

vs.“Home”).

•Avoidusingspecialcharacters,emojis,andhyphenated

names(@,&,#,/,-,*,+,etc.).

•Avoidusingacronyms(“Emergency”vs.“ICE”or“InCase

ofEmergency”)orwordswithallcapitalletters.

•Spellwordscompletely;systemwillnotrecognize

abbreviations(“DoctorSmith”vs.“Dr.Smith”).

•Alwayswaitforthebeepbeforespeakinganycommands.

•WhenusingVRtoplaceacall,speakinanatural,moderate

tone,withclearpronunciation.Thesystemmayhavetrouble

recognizingcommandsifyouspeaktoosoftlyortooloudly.

•Openwindows,sunroof,weather(wind/rain),oranA/Cfan

operatingathigherspeedscaninterferewithVRaccuracy.

•YourVRsystemmayhavedifficultyunderstandingsome

accentsoruncommonnames.

•Pressthetalkbuttonandsay“Help”togetalistofavailable

commands.

Pairing or Connecting Your Phone with Bluetooth

•Select“DeviceConnections”intheinfotainmentsystem

display

or“Call”buttononthesteeringwheeltobeginthe

pairingprocessifnophonehaspreviouslybeenpaired.

•Duringthepairingprocess,pleasemakesureyouaccept

allrequestsforphonebookdownloadandfutureauto-

connectiononyourphone.

•Topairasecondphoneorsubsequentphones,reference

themanualsandguidessuppliedwithyourCarnivalMPV

asstepsvarybyinfotainmentsystem.

•Ifyouexperienceanyissueswithauto-connection,

trythefollowing:

•Rebootyourphone(turnthephoneoffandthenon).

•Updatethephoneoperatingsystemtothemostrecently

releasedversion.

•DeletethephonefromthelistofBluetooth

devices

ontheinfotainmentsystemdisplayanddeleteKia

devicefromthelistofBluetooth

devicesonyour

phone,andre-pair.

•EnsurethephonehastheBluetooth

featureactivated.

•Ifsomecontactsarenotdownloadingtotheinfotainment

systemdisplay,checktoconfirmthatthecontacthas

beenenteredcorrectlyandthatithasbeenstoredunder

thecategories(HOME,MOBILE,WORK,iPhone

®3

)thatare

supportedbytheinfotainmentsystemdisplay.Somecontact

categories(MAIN,PAGER,OTHER)maynotbesupported.If

thenumberofcontactsexceedsthemaximumnumberallowed

ontheinfotainmentsystemdisplay,contactswillbepartially

downloaded.Ensurethatonlythe“phonecontactlist”is

selectedforcontactdownloadonyourphone(notsocialmedia

oremailcontactlistsasthesecontactsmaynotdownloadto

theinfotainmentsystemdisplay).

• Phoneoperatingsystemschangefrequentlyandsomephones

mayhavevaryingcompatibilitylevelswiththeBluetooth



system.Foranyquestionsregardingthefeaturesofyour

vehicle,pleasecontactyourpreferredKiadealerorcontact

KiaConsumerAssistanceat1-800-333-4542.

Other Bluetooth

Tips

•Bluetooth

receptionisaffectedbycarriercoverageandis

dependentonthephone.

•IfstreamingaudiothroughBluetooth

fromadevice,ensure

thelisteningvolumeonthedeviceisturnedup.

Smartphone Connectivity

Apple CarPlay

®3

YourvehicleoffersyoucommandofyourcompatibleiPhone

whenyouconnectthroughAppleCarPlay

onyour

infotainmentsystemdisplay.Thiswillenableyoutomakecalls,sendhands-freetexts,accessmanyofyourfavorite

appsandmusic,andgetnavigationhelpwithSiri

voicecontrol.

ToconnectAppleCarPlay,visithttps://youtu.be/98TNWMOQfdU

Android Auto

TM4

YourvehicleallowsyoutoconnecttoyourcompatibleAndroid

phoneviaAndroidAuto

onyourinfotainment

systemdisplay.Throughthisfeature,youcanaccessmusic,yourphone’sdialer,navigationhelp,andmorewithan

intuitiveinterfaceandvoicecommands.Youcanevenaccessyourphonethroughyoursteeringwheelcontrols.

ToconnectAndroidAuto,visithttps://youtu.be/sTR4KotSOzU

ForselectmodelsequippedwithwirelessAppleCarPlayandAndroidAuto,visithttps://youtu.be/oUXXuAZAOEI

Kia Access App*

• Yourcellphoneandyourvehiclehavetobeconnectedtoacellularnetworkwithagoodwirelesssignalstrength

inordertouseKiaConnect(formerlyUVOlink).Iftheseconditionsarenotmet,remotecommandsmaynot

executeormaytakelongertoexecute.

• TouseRemoteStartorRemoteStartwithClimateControlfeature,alldoors,hoodandtrunk/liftgatemustbe

closedandlocked.RemoteStartorRemoteStartwithClimateControlfeaturewilloperatefor10minutes,and

thenthevehicleshutsoffautomatically.

• ActivateRemoteStartorRemoteStartwithClimateControlfeatureafewminutesbeforeyouplantogetintothe

vehicle.Thiswillallowvehicleinteriortoreachadesiredtemperature.

• Thequickestwaytoobtainanaccuratevehiclestatusisbypressingtherefreshicononyourapporcustomer

webportal.

• Inordertohelppreservevehiclebattery,KiaConnectwillnotworksevendaysaftertheignitionwaslastturnedon.

Youwillneedtore-startyourvehiclewithakeyfobinordertouseKiaConnectagain.

Feature Videos

Toviewavideoonyourmobiledevice,snapthisQRCodeorvisitthelistedwebsite:

https://www.youtube.com/KiaFeatureVideos

Need help?

Do you have a question about the Kia Carnival MPV 2024 and is the answer not in the manual?

Summary

Vehicle Feature Tips

Voice Recognition and Bluetooth

Tips for improving voice recognition performance by optimizing phone contacts and speaking clearly.

Pairing or Connecting Your Phone with Bluetooth

Steps and troubleshooting for pairing a phone via Bluetooth, including contact download and auto-connection.

Other Bluetooth Tips

Advice on Bluetooth reception, carrier coverage, and ensuring device volume is turned up.

Smartphone Connectivity

Control your iPhone via the infotainment system for calls, apps, navigation, and music using Siri voice control.

Android Auto

Connect your Android phone for music, navigation, calls, and more via an intuitive interface and voice commands.

Kia Access App

Connect your phone and vehicle to use Kia Connect features like remote start and climate control.

Power Liftgate and Smart Liftgate

Instructions for opening, closing, and adjusting the power liftgate from inside and outside the vehicle.

Lane Following Assist (LFA)

System that helps keep the vehicle centered in its lane by monitoring lane markings and adjusting steering.

Wireless Smartphone Charging System

Enables wireless charging for compatible smartphones by placing them on the center charging pad.

Forward Collision-Avoidance Assist (FCA)

Detects vehicles or pedestrians ahead and warns the driver, applying brakes if a collision is imminent.

Parking Distance Warning (PDW)

Supplemental system that assists the driver by chiming when objects are detected near the vehicle.

Auto Defogging System

Automatically reduces windshield fogging by sensing moisture and adjusting to defrost mode.

Seat Warmers and Ventilated Seats

Controls for adjusting seat temperature for warming or ventilating with multiple intensity settings.

Rear-Seat Voice Recognition and Quiet Mode

Allows 2nd-row occupants to control vehicle functions via voice and enables a quieter cabin environment.

Blind-Spot Collision-Avoidance Assist (BCA)

Monitors blind spots for approaching vehicles, warns the driver, and can apply brakes to mitigate collision.

Connectivity Ports and Power Outlets

Details on USB charger ports, multimedia USB port, and AC inverter for charging devices and powering electronics.

Passenger View and Passenger Talk

Features allowing front passengers to see and communicate with rear passengers via an in-cabin camera.

2 nd-Row Removable Seats

Instructions for removing and installing the 2nd-row tumble seats to maximize cargo space.

3 rd-Row Seat Folding and Stowing

Procedures for folding and stowing the 3rd-row seats to create additional luggage compartment space.

Power Sliding Doors Operation

Controls and functions for operating the power sliding doors, including key fob and interior/exterior buttons.

Automatic Climate Control

Overview of automatic climate control features, including temperature, fan speed, and mode selections.

Overview

Voice Recognition and Bluetooth®
Smartphone Connectivity
Kia Access App (formerly UVO link)
Power Liftgate / Smart Liftgate with Auto Open and Close
Lane Following Assist (LFA)
Wireless Smartphone Charging System
Forward Collision-Avoidance Assist (FCA)
Auto Defogging System
Blind-Spot Collision-Avoidance Assist (BCA)
USB Charger Ports, Multimedia USB Port, Power Outlets, and AC Inverter
2nd-Row Removable Seats
Removing Tumble Seat
Installing Tumble Seat
3rd-Row Seat – Folding and Stowing
Folding 3rd-Row Seat
Raising 3rd-Row Seat
Power Sliding Doors
Power Open/Close Controls
Automatic Climate Control
A Driver's temperature control
B AUTO (automatic control) button
C Front mode selection button
D Passenger's temperature control
E Rear mode selection button
F Rear temperature control
G Front fan speed control button
H Front mode selection button
I Rear climate control on/off button
J A/C on button
K Air intake control button
L Front windshield defroster button
M Rear window defroster button
N Rear climate control on/off button
O Rear mode selection buttons
P Rear temperature control button
Q Rear fan speed control buttons

The 2024 Kia Carnival MPV is a versatile vehicle equipped with numerous features designed to enhance comfort, convenience, and safety.

Voice Recognition and Bluetooth®

The vehicle's Bluetooth® Voice Recognition (VR) system allows for hands-free control of various functions. To optimize VR performance, it's recommended to use full names for contacts (e.g., "John Smith" instead of "Dad"), avoid special characters, emojis, and hyphenated names, and refrain from using acronyms or all-capitalized words. Speaking in a natural, moderate tone with clear pronunciation is crucial for accurate recognition. Environmental factors like open windows, sunroof, or high A/C fan speeds can interfere with VR accuracy. Users can press the talk button and say "Help" for a list of available commands.

Pairing a phone with Bluetooth® is initiated by selecting "Device Connections" on the infotainment system display or pressing the "Call" button on the steering wheel. During pairing, users must accept all requests for phonebook download and future auto-connection on their phone. For subsequent phones, the process may vary by infotainment system. If auto-connection issues arise, troubleshooting steps include rebooting the phone, updating its operating system, deleting and re-pairing the device, and ensuring Bluetooth® is activated on the phone. Some contacts may not download if they are not stored under supported categories (HOME, MOBILE, WORK, iPhone®) or if the total number of contacts exceeds the maximum allowed. Only the "phone contact list" should be selected for download, not social media or email contact lists. Phone operating systems frequently change, leading to varying compatibility levels. For assistance, users can contact their Kia dealer or Kia Consumer Assistance. Bluetooth® reception is dependent on carrier coverage and the phone itself. When streaming audio via Bluetooth®, ensure the device's listening volume is turned up.

Smartphone Connectivity

The vehicle supports both Apple CarPlay® and Android Auto™. Apple CarPlay® allows users to connect their compatible iPhone® to the infotainment system display, enabling calls, hands-free texts, access to apps and music, and Siri® voice-controlled navigation. Android Auto™ connects compatible Android™ phones to the infotainment system, providing access to music, the phone's dialer, navigation, and more through an intuitive interface and voice commands, also controllable via steering wheel controls. Select models are equipped with wireless Apple CarPlay and Android Auto.

Kia Access App (formerly UVO link)

The Kia Access app requires both the cell phone and the vehicle to be connected to a cellular network with good wireless signal strength for remote commands to execute promptly. For Remote Start or Remote Start with Climate Control, all doors, the hood, and the trunk/liftgate must be closed and locked. This feature operates for 10 minutes before the vehicle automatically shuts off. Activating Remote Start a few minutes before entry allows the vehicle interior to reach a desired temperature. The quickest way to get an accurate vehicle status is by pressing the refresh icon on the app or customer web portal. To preserve the vehicle battery, Kia Connect will not work seven days after the ignition was last turned on, requiring a key fob restart to reactivate.

Power Liftgate / Smart Liftgate with Auto Open and Close

The Smart Liftgate with Auto Open and Close feature is designed for convenience, allowing hands-free operation. To enable this feature, it must be activated in the User Settings menu. Opening from Inside the Vehicle: To open the Power Liftgate, press and hold the Power Liftgate Open/Close button A for approximately 3 seconds. To stop it, press and hold the button again. Opening/Closing from Outside the Vehicle: To open the Power Liftgate, press the Power Liftgate Release button B on the exterior of the liftgate. To close it, press the Power Liftgate Close button C. To stop it, press the button again. Power Liftgate Opening Height Adjustment: The opening height of a fully opened liftgate can be adjusted. Open the liftgate to the desired height, then press and hold the Power Liftgate Close button C for more than 3 seconds until a beep sounds. The new height setting is saved. Smart Power Liftgate with Auto Open and Close: When the Smart Key fob is on your person and you are near the back of the vehicle for 3 seconds, the Smart Liftgate will automatically open. The system will blink and beep to alert you before opening. To disable this, turn off the Smart Liftgate in the User Settings menu. Keep In Mind: The Smart Liftgate will be enabled in Vehicle Settings first for it to function as outlined above.

Lane Following Assist (LFA)

LFA is a system designed to help ensure the vehicle stays centered in its lane by monitoring the detected lane markings and adjusting the steering. LFA is activated by pressing the Driving Assist button B. When turned ON, the Instrument Cluster indicator will illuminate WHITE. It will remain WHITE if the vehicle is traveling at 0 mph and the system is ready to detect lane markings. It will illuminate GREEN when the system detects lane markings and is actively assisting. LFA operates only when the vehicle is traveling in its lane and at speeds greater than 0 mph but less than 120 mph. LFA User Settings: With the vehicle at a standstill, the gear shift in Park, and the ignition ON, go to the User Settings menu in the Instrument Cluster. Press the Mode button C on the Steering Wheel, then select User Settings. Press the Move (OK) button D up/down and select Driver Assistance > Lane Following Assist. Press the Move (OK) button D to enable LFA. Some models access settings through the Vehicle Settings in the infotainment system. Press the Setup hard key on the infotainment system, then VEHICLE on the screen to enter Vehicle Settings. Some vehicles have a Lane Following Assist/Lane Safety button on the Driver's Panel or the Steering Wheel. Press to activate LFA.

Wireless Smartphone Charging System

The Wireless Smartphone Charging System allows for convenient charging of compatible devices.

Enable the Wireless Smartphone Charging System in the User Settings menu of the Instrument Cluster or infotainment system.
Place the device on the charging pad A.
The indicator light B may change to AMBER once the wireless charging begins.
Once charging is complete, the AMBER light may change to GREEN. Note: For wireless charging to work, the ignition must be ON, all doors must be closed, and the Smart Key Fob must be detected inside the vehicle.

Forward Collision-Avoidance Assist (FCA)

FCA is designed to detect and monitor a vehicle or object ahead and provide a warning to the driver if a potential collision is detected. If the driver does not react, the system may apply emergency braking. FCA is a supplemental system and may not prevent all collisions. It is not a substitute for safe driving practices. FCA User Settings: FCA is ON by default in most Kia models. FCA can be activated or deactivated by going to the User Settings menu in the Instrument Cluster. Press the Mode button C on the Steering Wheel, then select User Settings. Press the Move (OK) button D up/down and select Driver Assistance > Forward Collision-Avoidance Assist. Press the Move (OK) button D to select Active Assist, Warning Only, or Off. Active Assist: FCA will provide a warning (audible and visual) and apply the brakes in certain circumstances. Warning Only: FCA will provide a warning only (audible and visual). Off: The system is off, no warnings provided. To adjust FCA initial warning timing, go to User Settings, then Driver Assistance > Warning Timing, and press the Move (OK) button D. Normal: This setting allows for a nominal amount of distance. Late: Reduces the amount of distance between the vehicles before the initial warning occurs. Note: The FCA system is active when the ignition is ON, the gear shift is in any position except Park, and the FCA button is ON. Vehicle is traveling faster than 6 mph. Vehicle stability control (ESC) is ON.

Forward / Reverse Parking Distance Warning (PDW)* PDW is a supplemental system that assists the driver by chiming if an object is detected within the sensing area to the front, rear, and side of the vehicle when moving forward or backing up. To activate PDW, press the Reverse/Parking Safety button A (LED illuminated). PDW is also activated when the ignition is ON and the gear shift is moved into R (Reverse). To deactivate PDW, press the Reverse/Parking Safety button A (LED not illuminated).

Auto Defogging System

The Auto Defogging system is designed to reduce fogging on the inside of the windshield by automatically sensing moisture. The system will automatically change to defrost mode when needed. Auto Defogging is set to ON by default. To cancel Auto Defogging, press the Front Defrost button for 3 seconds when the ignition is ON (ADS OFF icon will illuminate). To turn Auto Defogging on again, press the Front Defrost button for 3 seconds.

Seat Warmers / Ventilated Seats* To operate the seat warmers or ventilated seats, press button A up (warming) or down (ventilating) once for high setting (3 LEDs lit), again for medium setting (2 LEDs lit), again for low setting (1 LED lit), and again to turn OFF.

Rear-Seat Voice Recognition / Quiet Mode* Rear-Seat Voice Recognition allows 2nd-row occupants to control various vehicle functions via voice command, such as adjusting the audio and temperature controls. On the Home screen, press All Menus > Setup > Voice Recognition. Then turn on the Rear-Seat Voice Recognition function. Quiet Mode mutes the speakers in the 2nd and 3rd rows to create a quieter environment for sleeping passengers while allowing front-row occupants to listen to audio through the front speakers. On the Home screen, press All Menus > Setup > Quiet Mode to activate it.

BCA uses rear-corner radar sensors in the rear bumper to monitor and warn the driver in certain situations if it detects an approaching vehicle in the driver's blind spot area and before changing lanes. Initially, BCA provides Blind-Spot Collision Warning (BCW) when it detects a potential collision with a vehicle, emitting an audible warning and visual alert on the outside rearview mirrors. If the system detects that the collision risk has increased, BCA automatically applies the opposite-side front brake to try and mitigate a potential collision. 1st-stage: When another vehicle is detected within the BCW warning boundary A, an indicator will illuminate on the outside rearview mirrors B. 2nd-stage: When the 1st-stage warning is on and the driver activates a turn signal, a flashing indicator will illuminate on the outside rearview mirrors and the system will sound a warning. 3rd-stage: When the 1st-stage warning is on and the 2nd-stage warning has already occurred, and the system detects that the risk of a collision has increased, braking is applied to the opposite-side front wheel and a visual warning occurs. BCA User Settings: To turn BCA on: With the vehicle at a standstill, the gear shift in Park, and the ignition switch or Engine Start/Stop button in the ON position, go to the User Settings menu in the Instrument Cluster. To do so, press the Mode button C on the Steering Wheel, then select User Settings. Press the Move (OK) button D up/down and select Driver Assistance > Blind-Spot Safety > and then press the Move (OK) button D. Some models access settings through the Vehicle Settings in the infotainment system. Press the Setup hard key on the infotainment system, then VEHICLE on the screen to enter Vehicle Settings. To set BCA when in Blind-Spot Safety, select either: Active Assist: BCA will provide a warning (audible and visual) and may activate Electronic Stability Control (ESC) and temporarily apply braking power. Warning Only: Vehicle will provide a warning only (audible and visual). Off: System is off, no warnings provided. To set the initial warning activation time, go to User Settings, then Driver Assistance, Warning Time and press the Move (OK) button D. You can adjust the warning timing to: Normal: This setting allows for a nominal amount of distance. Late: Reduces the amount of distance between the vehicles before the initial warning occurs.

USB Charger Ports, Multimedia USB Port, Power Outlets, and AC Inverter

USB Charger Ports A: Are located in the center panel and in the back of the seats and center console. Multimedia USB Port B: Use the Aux port to connect audio devices and the Multimedia USB port to connect USB audio devices and smartphones. AC Inverter: 115V/100W power inverters are located in the back of the center console and in the luggage compartment.

Passenger View / Passenger Talk* Passenger View: An in-cabin camera helps the front passenger talk with rear passengers while viewing them on the infotainment system screen. To use it, press the Passenger View icon A on the infotainment system screen. Passenger Talk: Press the button B located on the overhead console to use the Passenger Talk, cabin intercom, function.

2nd-Row Removable Seats

The 2nd-row seats are designed for easy removal to maximize cargo space.

Removing Tumble Seat:

To remove the seat, press the release handle C.
At the rear of the center seat, pull on the center seat left strap B to slide the seat forward.
To fold the seatback flat, pull on the strap A on the front of the seat.
To remove the seat from the vehicle, pull on the bottom center strap D.

Installing Tumble Seat:

Ensure the 2nd-row seats are all the way forward.
Place and align the seat properly on the floor anchors E.
Push the seat back until it latches into place. The RED/GREEN indicator F should be GREEN.
Ensure the seat is latched securely by checking the RED/GREEN indicator F.
Push up on the seatback release handle G or B on the seatback backward to ensure the seatback is locked.
Replace the headrest and return the seat belt to its proper position.

3rd-Row Seat – Folding and Stowing

Folding 3rd-Row Seat:

To fold the 3rd-row seat, press the lock release button A (located in the luggage compartment for additional cargo space, or the seat release button on the side of the seat).
The seat will fold down backward.
To stow the seat, pull the strap B to stow.

Raising 3rd-Row Seat:

Pull up on the release handle C to move the seat back to its original position.
Pull on the strap D to raise the seatback.
Push the seatback until it is in the proper position for you. Reminder: Ensure the seat straps on the front and back of the 3rd-Row Seat are for folding only. Do not pull on the straps to raise the seatback, as this may cause damage to the mechanism. For the other half of the 3rd-Row seat, follow the same instructions as outlined above.

Power Sliding Doors

Power Open/Close Controls:

Power Sliding Door Buttons A: Located on the driver's panel controls, or on the center pillar B, or on the key fob C. Power Open/Close Key Fob: To open and close the Power Liftgate/Sliding Doors simultaneously, press and hold the Power Open/Close key fob button D (key fob) for approximately 3 seconds. Power Off Button E: When button E is OFF (not depressed), the Power Sliding Doors and Power Liftgate can be opened manually. When button E is ON (depressed), they operate automatically. The doors will also open/close automatically when pulling the handles from the inside or outside.