EasyManua.ls Logo

Kia e-niro - Safety Information and Systems; High Voltage Cabling Safety

Kia e-niro
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Niro EV Main Electronic Systems
High Voltage Orange Cabling
The High Voltage cabling is orange,
per Society of Automotive Engineers (SAE) standards.
Cables run under the floor of the vehicle and connect the High Voltage Battery to the EPCU,
Motor, LDC, Inverter, OBC, A/C compressor and other High Voltage components located
towards the front of the vehicle.
The presence of orange cables under the hood, on
the under-floor battery compartment,
or HV cables under the car, identifies the vehicle as an electric vehicle.
Never cut or disconnect the high voltage orange cabling and connectors without first
disabling the HV system by removing the safety plug (refer to page 15).
Exposed cables or wires may be visible inside or outside the vehicle. Never touch
the wires, cables, connecters, or any electric components before disabling the
system.
Failure to follow these instructions will lead to serious bodily injury or death by
electrical shock.
High Voltage Cables

Related product manuals