Navigation-Based Smart Cruise Control (NSCC)
11
(if equipped)
Navigation-Based Smart Cruise Control is designed to automatically adjust vehicle speed when driving on highways with posted
speed limits by using road information from the navigation system while Smart Cruise Control (SCC) is operating. SCC is designed
to maintain a predetermined distance from vehicles detected ahead by automatically adjusting the driving speed. When traffic is
detected, the vehicle is designed to slow down to maintain a set distance behind traffic without depressing the accelerator or
brake pedal.
Highway Curve Zone Auto Slowdown
NSCC can automatically adjust the vehicle speed when it detects a curved road ahead and when it receives road
information from the navigation system. When NSCC detects a curve ahead, NSCC is designed to activate and
reduce the vehicle speed, and the NAV icon changes to AUTO and turns GREEN
A
in the NSCC indicator. When
the vehicle passes the curved road, the vehicle may return to its previously set speed.
Turn On/Set/Adjust SCC Speed: Press the Driving Assist button
A
on the steering wheel to activate SCC, and the
speed will be set to the current vehicle speed. SCC may decrease the speed to maintain the distance to the vehicle
in front. The CRUISE indicator will illuminate on the instrument panel. Use
B
+/- to toggle up or down to accelerate
or decelerate to the desired speed.
Set the Vehicle Distance: Press the Vehicle Distance button
C
on the steering wheel. Each time you press the
button, the vehicle distance will change
D
, indicated by the number of bars that appear on the display.
Pause/Resume SCC Operation: Depress the brake pedal or press the Pause/Resume button
B
. The CRUISE
indicator on the instrument panel will change.
SCC Sensitivity Adjustment: Press the Mode button
E
on the steering wheel. With the OK button
F
, select Drive
Assistance, then SCC Response. Then select Fast, Normal, or Slow.
Turn Off SCC: Press the Driving Assist button
A
. The CRUISE indicator on the instrument panel will turn OFF.
Quick Tips
• The navigation part of Smart Cruise Control does not function when a destination is not set on the infotainment navigation system.
• If your vehicle speed is between 0 and 20 mph when you press the Driving Assist button to turn NSCC on, the speed will be set to
20 mph.
• When following a vehicle, the system can automatically adjust your cruise speed based on the vehicle detected in front. It can also
bring the vehicle to a complete stop in certain conditions. If the vehicle remains at a standstill for more than three seconds, you
must depress the accelerator pedal or toggle the +/- switch up/down to restart vehicle movement.
• NSCC is designed to function above approximately 20 mph only.
• NSCC will not activate until the brake pedal has been depressed at least once after the ignition is turned ON or during engine start.
Reminders
• CRUISE indicator must be ON to operate SCC.
• The speed setting will need to be reset when ignition is cycled.
• The distance settings are approximations and may vary depending on vehicle speed. See the Owner’s Manual for
more information.
• SCC is also canceled when the driver’s door is opened, the gearshift is changed out of D (Drive), the Electronic Parking Brake (EPB)
is activated, and various other conditions. See the Owner’s Manual for other conditions.
• If SCC is left on, it can be activated inadvertently. Keep the system off when not in use to avoid setting a speed which the driver is
not aware of.
• NSCC is only available on certain controlled access roads and highways.
• The navigation part of NSCC does not function when a destination is not set on the infotainment navigation system.
Wireless Phone Projection
You can connect your compatible iPhone
®3
to the vehicle through wireless Apple CarPlay
®
,
3
and you can connect your compatible
Android™
4
phone to the vehicle through wireless Android Auto™.
4
Wireless Apple CarPlay
®
Wireless Apple CarPlay
®
requires iPhone
®
cellular data service. Normal data rates apply.
Setup:
1. On the center display, touch SETUP > DEVICE CONNECTIONS > PHONE PROJECTION.
Wireless Android Auto™
Wireless Android Auto™ only works with certain Android™ models and requires cellular data service. Normal data rates apply.
Setup:
1. Download the Android Auto™ app from the Google Play™
4
store. Open the Android Auto™ app and proceed with the on-screen
instructions to complete setup on the mobile device.
2. On the center screen, touch SETUP > DEVICE CONNECTIONS > PHONE PROJECTION.
Quick Tips for Wireless Apple CarPlay
®
and Android Auto™
• Kia recommends you update your smartphone to the latest operating system release.
• Visit https://youtu.be/oUXXuAZAOEI for an informative video on wireless phone projection.
• Visit Apple.com for Apple CarPlay
®
app concerns.
• Visit the smartphone manufacturer’s website for Android Auto™ app concerns.
Wireless Smartphone Charging System*
12
1. To enable Wireless Charging in Vehicle Settings in the infotainment system, select
CONVENIENCE > WIRELESS CHARGING SYSTEM FOR MOBILE DEVICES.
2. Place compatible smartphone on the center of the charging pad
A
.
3. Indicator light
B
may change to AMBER once the wireless charging begins.
Once charging is complete, the AMBER light may change to GREEN.
Dual-Clutch Transmission (DCT)*
DCT gives the driving feel of a manual transmission, yet provides the ease of a fully automatic transmission. To hold the vehicle
stationary on an incline, the service brake or parking brake MUST be used or the gearshift MUST be in the (P) Park position.
A slight lag may be experienced at takeoff from standstill during aggressive acceleration maneuvers. If the clutch is overheating,
an AMBER-colored warning light will be displayed in the Instrument Cluster. Should this condition occur, pull over and place the
vehicle in Park and idle the engine.
Reverse Parking Collision-Avoidance Assist (PCA-R)*
13
PCA-R is designed to detect certain objects/pedestrians behind the vehicle and issues an audible warning and/or applies emergency
braking to help reduce the possibility of a collision when the vehicle is in Reverse.
PCA Settings
• PCA-R can be turned ON/OFF by going to Vehicle Settings in the infotainment system.
• Only adjust settings when the vehicle is at a standstill, gearshift is in Park, and the ignition is ON or the Engine Start/Stop
button is in the ON position.
• To access Vehicle Settings in the infotainment system, press SETUP > VEHICLE > DRIVER ASSISTANCE > PARKING SAFETY >
BACKWARD SAFETY.
Quick Tip
• The Warning Volume can be adjusted in the Vehicle Settings by pressing SETUP > VEHICLE > DRIVER ASSISTANCE > WARNING
METHOD. You can enable DRIVING SAFETY PRIORITY.
Reminders
• PCA-R is operational when Rear Active Assist is selected in the Vehicle Settings.
• PCA-R will only operate when:
• The vehicle’s speed is below 6 mph.
• The trunk is closed.
• The gearshift is in Reverse.
To Next Page
Loading...
