47
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
Smart Power Liftgate*
†21
(continued)
HOLD HOLD
HOLD
To view a video on your
mobile device, snap this
QR Code or visit the listed
website.
Refer to page 2 for more
information.
Smart Power Liftgate
Video
Power Liftgate Opening
Height Adjustment Video
QR CODE
www.youtube.com/KiaFeatureVideos
• During the Smart Power Liftgate alert, the Smart Power Liftgate can be
deactivated with the Smart Key by pressing any button on the key fob
• The open height can be adjusted. For information on how to set the open
height, see page 43 or your Owner’s Manual
QUICK TIP
REMINDERS:
• All doors are closed and locked after about 15 seconds
• If the POWER DOOR OFF button is depressed, the Smart Power Liftgate will not operate
• The Smart Power Liftgate feature will not operate when the doors are recently closed and
locked, and the Smart Key is still detected after 15 seconds near the vehicle or within 60
inches of the door handles, a door is not locked or closed or the Smart Key is in the vehicle
• Press any button on the Smart Key fob during the Detect and Alert stage to deactivate the
Smart Power Liftgate function
• Ensure obstacles and people are out of the way of the Liftgate
Smart Key:
To open the Smart Power Liftgate*, press and hold the Smart key Liftgate
button
A
until the Liftgate begins opening. Press again to close.
REMINDER: Pulling the Liftgate upward by the handle or pressing the button a second time
will interrupt the automatic opening of the Smart Power Liftgate.
Smart Power Liftgate*
When the Smart Key fob is on your person and you are near the back of
the vehicle, within close proximity, the hazard lights will blink and a chime
will sound for about 3 seconds as an alert that the Smart Power Liftgate*
is about to open.
Then the alert system will blink and chime two additional times before
opening the Smart Power Liftgate*
B
.
The Smart Power Liftgate* feature is OFF by default. To enable the Smart
Power Liftgate*, go to User Settings in the LCD Instrument Cluster modes.
Refer to section 4 in the Owner’s Manual for more information.
A
B
OTHER KEY FEATURES
To Next Page
Loading...
