Safety features of your vehicle
183
2nd row headrest
Adjusting the height up and down
To raise the headrest, push and hold the
release button (1) while pulling it up to
the desired position (2). To lower the
headrest, push and hold the release but-
ton (1) on the headrest support and
lower the headrest to the desired position
(3).
Removal
Outer
To remove the headrest :
1. Raise it as far as it can go.
2. Insert the small thin bar into the
release hole (A).
3. While pressing the release hole (A),
press the button (B), then pull the
headrest up.
To reinstall the headrest, insert the head-
rest holes (3) into the poles and press
the headrest down. Then adjust it to the
appropriate height and make sure the
headrest is locked in place.
Center
To remove the headrest, raise it as far as
it can go then press the release button
while pulling the headrest up (2).
To reinstall the headrest, put the head-
rest poles (3) into the holes while press-
ing the release button (1). Then adjust it
to the appropriate height.
Outside
Center
OXM039018
OXM039018N
Outer
OXM039020N
Center
OXM039018
To Next Page
Loading...
Need help?
General
