ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
Selecting a Location:
6
6.
In order to change the motion sensor settings
you must unscrew finial (C) and remove
decorative cap (D) to access the motion
sensor adjustment dial (G).
Lower decorative cap (D) over adjustment dial
(G) and secure with finial (C).
• When installed at a height of 6.5ft., at 68ºF, the light will provide a maximum detection distance of
40ft. The sensitivity will be higher at cooler temperatures. You may will to make adjustment
again when the season changes.
• The detection range coverage is approximately 120 degrees.
6.5 ft.
40 ft.
120˚
Top View
6
D
C
G
To Next Page
Loading...
