To Next PageTo Next Page
Need help?Do you have a question about the Kichler Lighting Szeplo II and is the answer not in the manual?
General| Brand | Kichler Lighting |
|---|---|
| Model | Szeplo II |
| Category | Fan |
| Language | English |
To reduce the risk of electric shock, ensure electricity is turned off at the circuit breaker or fuse box before beginning.
Use only the two steel screws provided with the outlet box for mounting. Most outlet boxes are not acceptable for fan support.
Mount directly to a structural framing member or an outlet box marked 'Acceptable for Fan Support'.
Do not bend blade brackets during assembly or installation. Do not insert objects in the path of the blades.
Ensure outlet box is securely fastened to structural member. Pass wires through mounting bracket and install to outlet box.
Insert cable through mounting bracket and outlet box, adjust length, secure clamp, and attach loop to wood screw.
Connect the GREEN grounding leads to the supply grounding conductor using a wire connector.
Connect fan WHITE wire to supply WHITE and fan BLACK wire to supply BLACK using wire connectors.
Position blade on arm, start screws (do not tighten), then tighten all securely. Ensure blade is straight.
Turn wall control to 'OFF', restore power, then press 'ON' switch and hold 'button' for 3-5 seconds within 60 seconds.
Fan runs for 2 mins in each direction. Light blinks when complete. Do not interrupt for 5 minutes.
