Kicker 47KSS - Page 23

EOP2021-CS17 REV-A.3
KSS Installation Guide
Page 23 of 28
2. Using side cutters remove any tabs that may impede installation of adapter or reassembly
of factory components. Cutting locations are molded into the backside of the adapter.
3. For some applications the adapter clips to the mounting panel on one side. It may be
necessary use the foam damper to tighten the fitment of the of the clip-on side of the
adapter.
FOAM
FOAM
BODY PANEL
BODY
PANEL
SPEAKER HOLE