4English
Specifications
Note: All specifications and performance
figures are subject to change. Please visit
www.kicker.com for the most current
information. To get the best performance
from your new KICKER speakers, we
recommend using genuine KICKER
accessories and wiring. Please allow two
weeks of break-in time for the speakers to
reach optimum performance.
Pro Tip: You’re a KICKER amplifier and a
few cables away from a full system upgrade
that will dominate any factory system!
KICKER line of amplifiers make it easy to
upgrade to solid bass with your existing
or stock source unit. Also, ask your dealer
about KICKER Speaker upgrades.
CVX10 CVX12 CVX15
Woofer [in, mm] 10, 25 12, 30 15, 38
Recommended Amplifier Power [Watts RMS] 300–600 375–750 500–1000
Peak Power Handling [Watts] 1200 1500 2000
Sensitivity [1W, 1m] 85.7 87.1 91.6
Rated Impedance [Ω] 2 or 4 2 or 4 2 or 4
Fs [Hz] 35.4 28.5 23.7
Xmax (Linear Excursion) [mm] 16.25 16.25 19
Re [Ω] 3.4 3.7 4.2
Qts .403 .381 .216
Qms 10.754 10.098 7.521
Qes .419 .396 .222
Vas [ft³, L] .811, 22.99 2.04, 57.82 5.5, 156.71
Outer Frame Dimension [in, cm] 10-11/16, 27.1 12-9/16, 31.8 15-7/16, 39.2
Mounting Cutout [in, cm] 9-3/16, 23.3 11-1/16, 28 13-13/16, 35
Mounting Depth [in, cm] 5-15/16, 15.1 6-11/16, 16.9 8-1/2, 21.5
Frequency Response [Hz] 24–500 20–500 18–500
To Next Page
Loading...
Need help?
General
