EasyManua.ls Logo

Kicker DCompR10 User Manual

Kicker DCompR10
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CompR™ Subwoofer Enclosures
Caja de CompR
CompR Subwoofer Gehäuse
Caisson de Graves CompR
Package Contents:
CompR Enclosure
[4] Vehicle Mounting
Screws
[8] Subwoofer Mounting
Screws
[4] Mounting Brackets
Contenido del paquete:
Componentes de la caja
[4] Tornillos para montaje
en el vehículo
[8] Tornillos para montar el
subwoofer
[4] Soportes de montaje
Packungsinhalt:
CompR Gehäuse
[4] Schrauben zur
Montage im Fahrzeug
[8] Schrauben zur
Montage des Subwoofers
[4] Halterungen
Contenu du coffret :
Enceinte CompR
[4] Vis de montage pour
véhicule
[8] Vis de montage du
caisson de graves
[4] Pattes de fi xation
Model DCompR10 DCompR12 VCompR12
Nominal Impedance [Zn] | ohm [per enclosure] 2 2 2
Sensitivity [SPLo] | dB @ 1W, 1m 96.5 98 95
Peak Power [watts] 2400 3200 1600
Continuous Power | [watts RMS] 1200 1600 800
Enclosure Top Surface Depth | in [cm] 13 7/16 [34.1] 13 15/16 [35.4] 11 7/16 [29]
Enclosure Bottom Surface Depth | in [cm] 16 7/16 [41.7] 17 3/8 [44.1] 14 5/8 [37.2]
Enclosure Height | in [cm] 14 [35.6] 16 [40.6] 16 [40.6]
Enclosure Width | in [cm] 28 1/16 [71.2] 31 7/8 [810] 17 1/2 [44.5]
Modelo: DCompR10 DCompR12 VCompR12
Impedancia nominal [Zn] | ohmios [por caja] 2 2 2
Sensibilidad [SPLo] | dB @ 1W, 1m 96.5 98 95
Procesamiento máximo de potencia vatios, pico [RMS] 2400 3200 1600
Potencia Continua | [watts RMS] 1200 1600 800
Profundidad de la superfi cie superior de la caja | plg. [cm] 13 7/16 [34.1] 13 15/16 [35.4] 11 7/16 [29]
Profundidad de la superfi cie inferior de la caja | plg. [cm] 16 7/16 [41.7] 17 3/8 [44.1] 14 5/8 [37.2]
Altura de la caja | plg. [cm] 14 [35.6] 16 [40.6] 16 [40.6]
Anchura de la caja | plg. [cm] 28 1/16 [71.2] 31 7/8 [810] 17 1/2 [44.5]
Modell: DCompR10 DCompR12 VCompR12
Nennimpedanz [Zn] | Ohm [pro Gehäuse] 2 2 2
Empfi ndlichkeit [SPLo] | dB bei 1 W, 1 m 96,5 98 95
Spitzenbelastbarkeit | Watt [RMS] 2400 3200 1600
Dauerleistung | [Watt RMS] 1200 1600 800
Gehäuseoberfl ächentiefe oben | Zoll [cm] 13 7/16 [34,1] 13 15/16 [35,4] 11 7/16 [29]
Gehäuseoberfl ächentiefe unten | Zoll [cm] 16 7/16 [41,7] 17 3/8 [44,1] 14 5/8 [37,2]
Gehäusehöhe | Zoll [cm] 14 [35,6] 16 [40,6] 16 [40,6]
Gehäusebreite | Zoll [cm] 28 1/16 [71,2] 31 7/8 [810] 17 1/2 [44,5]
Modèle: DCompR10 DCompR12 VCompR12
Impédance nominale [Zn] | ohms [par caisson] 2 2 2
Sensibilité [SPLo] | dB @ 1 W, 1 m 96,5 98 95
Puissance admissible | watts, crête [effi cace] 2400 3200 1600
Puissance continue | [watts RMS] 1200 1600 800
Profondeur du caisson à la surface supérieure | pouces [cm] 13 7/16 [34,1] 13 15/16 [35,4] 11 7/16 [29]
Profondeur du caisson à la base | pouces [cm] 16 7/16 [41,7] 17 3/8 [44,1] 14 5/8 [37,2]
Hauteur du caisson | pouces [cm] 14 [35,6] 16 [40,6] 16 [40,6]
Largeur du caisson | pouces [cm] 28 1/16 [71,2] 31 7/8 [810] 17 1/2 [44,5]
Question and Answer IconNeed help?

Do you have a question about the Kicker DCompR10 and is the answer not in the manual?

Kicker DCompR10 Specifications

General IconGeneral
TypeComponent
Frequency Response25 - 500 Hz
Size (in, cm)10 inches (25.4 cm)
Mounting Cutout (in, cm)9.25 inches (23.5 cm)
Min Sealed Box Volume (cu. ft, L)0.5 cu. ft (14.2 L)
Max Sealed Box Volume (cu. ft, L)1.0 cu. ft (28.3 L)
Min Vented Box Volume (cu. ft, L)1.0 cu. ft (28.3 L)
Max Vented Box Volume (cu. ft, L)2.0 cu. ft (56.6 L)

Summary

Package Contents

Model Specifications

Nominal Impedance

Electrical resistance of the subwoofer enclosure in ohms per enclosure.

Sensitivity

Sound pressure level in dB at 1W, 1m.

Peak Power Handling

Maximum power handling capacity in watts (peak).

Continuous Power Handling

RMS power handling capacity in watts.

Enclosure Dimensions

Physical dimensions including top/bottom depth, height, and width in inches and cm.

Wiring Instructions

Mounting Instructions

Related product manuals