EasyManuals Logo
Home>Kicker>Enclosure>L7T

Kicker L7T User Manual

Kicker L7T
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
L7T SUBWOOFER ENCLOSURE
OWNER’S MANUAL
CHECK THE LOAD
The L7T subwoofer enclosures are available in
2 or 4 ohm impedance models. Check to see
if your amplifi er is optimized to drive the load of
your L7T enclosure.
L7T ENCLOSURES
The L7T-series enclosures combine
KICKER’s award-winning line of subwoofers
with computer-modeled and human fi ne-
tuned enclosures to offer a level of bass
performance never before thought possible
from a commercially available, ready-to-install
subwoofer system. The TL7T8 enclosure
features an 8 inch L7T subwoofer, the TL7T10
features a 10 inch L7T Subwoofer, and the
TL7T12 enclosure features a 12 inch L7T
subwoofer.
Plug your subwoofer speaker wire into the
terminals using the red connector as positive
and the black connector as negative. Connect
the other end of the wire to your subwoofer
amplifi er in accordance with its owner’s manual.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
Authorized KICKER Dealer:
Purchase Date:
Enclosure Model Number:
Enclosure Serial Number:
TL7T8 | TL7T10 | TL7T12Models:
Pro Tip: With a KICKER KXA amplifi er, a pair of KICKER KSC speakers, and a few KICKER cables, you’re
looking at a full system upgrade that will dominate! KICKER amplifi ers, speakers, and accessories make
it easy to upgrade with your existing or stock source unit. Ask your dealer about KICKER amplifi ers and
speaker upgrades to complete your system!
IMPORTANT SAFETY WARNING
Prolonged continuous operation of an amplifi er, speaker, or subwoofer in a distorted, clipped or over-
powered manner can cause your audio system to overheat, possibly catching fi re and resulting in serious
damage to your components and/or vehicle. Amplifi ers require up to 4 inches (10cm) open ventilation.
Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and
any surface.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kicker L7T and is the answer not in the manual?

Kicker L7T Specifications

General IconGeneral
BrandKicker
ModelL7T
CategoryEnclosure
LanguageEnglish

Related product manuals