To Next PageTo Next Page
Need help?Do you have a question about the Kicker Hideaway HS10 and is the answer not in the manual?
General| Enclosure Type | Sealed |
|---|---|
| Frequency Response | 25-120Hz |
| Amp Class | D |
| Low Pass Crossover | 50-120Hz |
| Phase Switch | 0 / 180 degrees |
| Subwoofer Size | 10 inches |
| Impedance | 2 Ohm |
| Width | 9.375" |
| Length | 14.5" |
| KickEQ™ Bass Boost | 0, +6, +12 dB |
Details the HS10 model, subwoofer size, power handling, and frequency response.
Lists specifications for crossover, input sensitivity, bass boost, and remote control features.
Provides guidance on selecting a suitable location and securing the subwoofer enclosure.
Explains the quick-connect wiring harness and audio input connections for signal.
Details how to use the Kicker KISL for RCA output connections.
Explains automatic turn-on selection and the phase switch function.
Guides on setting input level and adjusting the crossover frequency.
Describes how to set gain, use bass boost, and manage remote bass.
Helps diagnose problems related to the PWR/PRT LED status and lack of audio.
Provides solutions for reduced bass response and ground noise issues.
Crucial safety advice for jump-starting the vehicle to prevent damage.
Instructions on how to return the product for warranty service and required documentation.
Details what the warranty covers and common exclusions for the product.
