2
Hideaway™
POWERED SUBWOOFER
ENCLOSURE Owner’s Manual
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER powered subwoofer enclosure. Make
sure the mounting screws will not puncture the gas tank/brake lines/wiring or interfere with any mechanical parts
on the underside of the mounting surface. Choose a location that allows at least 4” (10cm) of open ventilation for
the amplifi er. If possible, mount the enclosure in the climate-controlled passenger compartment.
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
Model: HS10
Subwoofer [in, cm] 10”, 25
Continuous Power Handling [Watts RMS] 180W
Frequency Response [Hz] 25Hz–120Hz
Electronic Crossover 18dB/octave Lowpass 50–120Hz;
24dB/octave Highpass @ 25Hz
Phase Switch 0° / 180°
Input Sensitivity Low Level: 250mV–10V
High Level: 1V–40V
KickEQ™ Bass Boost Variable to +6dB @ 40Hz
Remote Bass Level Control Included
Start-Stop Compatible Yes
Net weight [lbs., kg] 11.4, 5.2
Height [inches, cm] 3-1/8, 8.1
Width [inches, cm] 10-3/8, 26.3
Depth [inches, cm] 14, 35.4
MODEL: HS10
The ultra-compact KICKER Hideaway™ Enclosure offers the quickest and easiest way to add a subwoofer to
your vehicle, providing signature KICKER bass in a small enclosure. This system has been meticulously fi ne-
tuned by KICKER engineers to deliver astounding performance and sound without the time-consuming setup
required for a typical amp-sub upgrade.
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information.
SPECIFICATIONS
2019 Hideaway Rev E.indd 22019 Hideaway Rev E.indd 2 5/8/2019 2:26:32 PM5/8/2019 2:26:32 PM
To Next Page
Loading...
