2
PS4 COAXIAL SPEAKERS
Owner’s Manual
PERFORMANCE
INSTALLATION
Authorized KICKER Dealer:
Purchase Date:
Woofer Size | in [mm] 4 [100]
Tweeter Size | in [mm] 3/4 [20]
Frequency Response | Hz 100–20,000
Max Recommended Amplifi er Power [Watts] | PEAK/RMS 100/50
Sensitivity [SPLo] | dB @ 1W, 1m 85.756
Nominal Impedance [Zn] | ohm 2 (40PS42), 4 (40PS44)
Weight | oz [g] 11.9 [338]
Mounting Hole Diameter | in [mm] 3 5/8 [93]
Mounting Depth | in [mm] 1 11/16 [43]
Top Mount Height | in [mm] 3/4 [19]
Please refer to your bike’s factory service manual for disassembly/installation information. Typically, you should
retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The KICKER PS4
is compatible with factory locations and 4” or 5” (with adapter plate) audio systems. If you are doing a custom
installation, be careful not to drill into wiring or vehicle mechanisms. You are solely responsible for securely
mounting the speakers. Use the included grilles after performing a custom installation.
Package Contents:
(2) PS4 Speakers (2) 12” wiring harnesses
(8) M4 x 25mm pan cross head woodscrews (8) M4 speed nuts
(4) 22ga, red crimp-style butt connectors (2) 4” to 5” Adapter plate
(2) Grilles (2) Kicker badges
2013 PS4 Rev C.indd 22013 PS4 Rev C.indd 2 6/17/2013 5:02:01 PM6/17/2013 5:02:01 PM
To Next Page
Loading...
Need help?
General
