WIRING
The L7 subwoofer enclosures are internally wired for a 2 ohm load at the speaker-wire connection terminal. Check to see if
your amplifi er is optimized to drive this load. The L7 enclosures combine KICKER’s award-winning line of square subwoofers
with computer-modeled and human fi ne-tuned enclosures for optimal performance in a ready-to-install subwoofer system.
The VL712 enclosure features a 12 inch L7 subwoofer, the TL710 enclosure features a 10 inch L7 Subwoofer, and the
DL712 enclosure features two 12 inch L7 subwoofers.
MOUNTING
Mount the brackets to the bottom of the enclosure using the supplied smaller screws. Securely attach the
enclosure to the vehicle with the supplied larger screws.
To avoid potential injury or possible death from forward movement of the enclosure during abrupt stops or
accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are solely
responsible for securely fastening the enclosure in your vehicle.
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing!
Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an
undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is
too loud and may permanently damage your hearing. Please use common sense when controlling volume.
IMPORTANT SAFETY WARNING – PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER
IN A DISTORTED OR CLIPPED MANNER CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT,
POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS
AND/OR VEHICLE.
Subwoofer grills sold separately
at your local KICKER dealer
2015 L7 Enclosure Rev D.indd 42015 L7 Enclosure Rev D.indd 4 10/17/2014 12:32:26 PM10/17/2014 12:32:26 PM
To Next Page
Loading...
Need help?
General
