MATERIAL SAFETY DATA SHEET
MSDS Number:
00057
Effective Date:
04/20/2001
Product Name: FM-200 Page:
4 of 7
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
Consult the OSHA respiratory protection information located at
29CFR 1910.134 and the American National Standard Institute's
Practices of Respiratory Protection Z88.2.
Other Protective
Clothing or Equipment: No information available
Exposure Guidelines: See Section II.
Work Hygienic Practices: Wash thoroughly after handling.
Wash contaminated clothing before reuse.
Make sure piping is empty before doing maintenance work.
Additional Information
No information available
SECTION IX - PHYSICAL & CHEMICAL PROPERTIES
Appearance: Colorless gas Percent Volatile: Not available
Boiling Point: -16.4 degrees C (3
degrees F)
pH Value: Not available
Bulk Density: Not available pH Concentration: Not available
Color: Colorless Physical State: Gas
Decomposition Temperature: Not available Reactivity in Water: Not water reactive
Evaporation Rate: Not available Saturated Vapor
Concentration: Not available
Freezing Point: Not available Softening Point: Not available
Heat Value: Not available Solubility in Water: 260 mg/L
Melting Point: -131 degrees C (-204
degrees F)
Specific Gravity or
Density (Water=1): 1.46
Molecular/Chemical Formula: C3HF7 Vapor Density: 6.04
Molecular Weight: 170 Vapor Pressure: 58.8 psia at 70 degrees
F (21 degrees C)
Octanol/Water Partition
Coefficient: Not available
Viscosity: Not available
Odor: Odorless Volatile Organic
Compounds: Not available
Odor Threshold: Not available Water/Oil
Distribution
Coefficient:
Not available
Particle Size: Not available Weight Per Gallon: Not available
Additional Information
No information available
SECTION X - STABILITY AND REACTIVITY
Stability: Stable under normal conditions of handling and use.
Conditions to Avoid: None
Incompatibility With Other
Materials: Powdered metals (ex. Al, Mg, or Zn) and strong alkalis, oxidizers or
reducing agents are not compatible with this and most other
halogenated organic compounds.
Hazardous Decomposition
Products: Thermal decomposition may produce the following:
Hydrogen fluoride
Carbon monoxide and carbon dioxide
Hazardous Polymerization: Will not occur
Conditions to Avoid: None
To Next Page
Loading...