To Next PageTo Next Page
Need help?Do you have a question about the Kidde K10LLCO and is the answer not in the manual?
General| Type | Carbon Monoxide Alarm |
|---|---|
| Sensor Type | Electrochemical |
| Alarm Sound Level | 85 dB at 10 feet |
| Display | No |
| Test/Reset Button | Yes |
| Low Battery Indicator | Yes |
| Power Source | Battery |
| Operating Humidity | 10% to 95% relative humidity |
| Certifications | UL 2034 |
| End of Life Signal | Yes |
| Operating Temperature | 40°F to 100°F (4.4°C to 37.8°C) |
| Warranty | 10 year limited |
This alarm detects carbon monoxide using an electrochemical cell. It alerts after ten years of use.
Details temperature range, humidity, audible alarm, digital display (K10LLDCO), CO sensor, battery, and storage.
Instructions for drilling holes, inserting plugs and screws, and mounting the back-plate.
Guidance on placing the alarm where it's unlikely to be knocked and ensuring upright position.
How to slide the alarm onto the back plate to activate the sealed lithium battery.
Describes how the alarm sounds when CO is detected at different levels.
Instructions for weekly testing by pressing the button to verify alarm functionality.
Procedure for qualitative testing using commercially available aerosol CO.
Describes the low battery monitor, replacement timeframe, and warning.
Explains temporary silencing of End of Unit Life or Low Battery chirps.
Step-by-step instructions for removing the back cover and sliding a switch to discharge the battery.
Defines carbon monoxide as a poisonous gas with no taste, colour or smell.
Lists common sources of carbon monoxide like fuel-burning appliances and blocked flues.
Instructions on cleaning the interior and exterior with compressed air or a damp cloth.
Details the terms of the ten-year limited warranty, exclusions, and liability limitations.
