Need help?Do you have a question about the Kidde KN-COB-B-LPM and is the answer not in the manual?
General| Type | Carbon Monoxide Alarm |
|---|---|
| Power Source | Battery |
| Sensor Type | Electrochemical |
| Alarm Volume | 85 dB |
| Display | No |
| Test Button | Yes |
| Low Battery Indicator | Yes |
| Test/Reset Button | Yes |
| Operating Temperature | 40°F to 100°F (4.4°C to 37.8°C) |
| Operating Humidity | 10% to 95% relative humidity |
| Alarm Type | Audio |
| Certifications | UL 2034 |
| Low Battery Signal | Yes, audible chirp |
| End of Life Signal | Yes, audible chirp |
Describes symptoms of mild, medium, and extreme CO exposure.
Explains dangerous, high, mid, and low CO concentration levels.
Lists common household appliances and conditions that produce CO.
Details transient CO situations caused by environmental factors and appliance use.
Provides guidance on where to place CO alarms for optimal detection.
Details areas where CO alarms should not be installed to ensure performance.
Step-by-step guide for plugging the alarm directly into a wall outlet.
Instructions for mounting the alarm on a wall using a power cord.
Guidance on placing the alarm on a tabletop for visibility and detection.
Explains the audible and visual indicators when CO is detected.
Describes how to view and reset the highest CO reading recorded by the alarm.
Instructions for regularly testing the alarm's functionality and indicators.
Details the process and approved brands for replacing the backup battery.
To Next Page