Kidde KN-SMFM-i - User Manual

Manual P/N 820-1356 Rev. A 11/07
SIGNALING
LISTED
U
L
ATTENTION: Please take a few minutes to thoroughly read this
user’s guide which should be saved for future reference and
passed on to any subsequent owner.
Smoke Alarm
User’s Guide
Model: KN-SMFM-I
• 120V AC • Rechargeable Backup Battery • Smart Hush
TM
KN-SMFM-I

Summary

What to do When the Alarm Sounds!

Smoke Alarm Procedure & Evacuation

Steps to take when the alarm sounds, including evacuation and calling the fire department.

Important Warnings

Power Dependency & Manual Importance

Critical warnings about power dependency, reading, and keeping the manual for future reference.

Location Avoidance & Installation Wiring

Wiring Requirements and Power Source

Details on junction box, wiring standards, power source, and inverter warnings.

Interconnect Wiring and Model Compatibility

Installation Instructions - Mounting

Bracket Installation and Wiring Connection

Operation, Testing, and Nuisance Alarms

Alarm Operation, Battery, and Hush Feature

Alarm operation, backup battery, Smart Hush™ feature, and safety cautions.

Testing, LEDs, and Cleaning

End of Life, Limitations, and Safety Habits

End-of-Life and Alarm Removal Procedures

Describes end-of-life signals, alarm removal, and disabling procedure.

Smoke Alarm Limitations and Safety Advice

Escape Planning and Fire Safety

Service and Warranty Information

Service Returns and Warranty Terms

Kidde KN-SMFM-i Specifications

Power

power source	120VAC (80mA) with Rechargeable Battery Back Up
audio alarm	85dB at 10ft
interconnects	Up to 24 Kidde devices/18 initiating

Operating Environment

temperature range	40˚F (4.4˚C) to 100˚F (37.8˚C)
humidity range	up to 85% relative humidity (RH)
resistance of interconnect wiring	maximum of 10 ohms

Weight and Dimensions

size	5.25” width x 1.5” depth
weight	.5lb
depth of box for installation	must exceed 2 1/8”