WARNING!
• Discharging / Killing the battery is permanent. Once the
alarm has been discharged, it cannot be reactivated!
• Once discharged, the alarm will NO LONGER DETECT SMOKE
or CO.
• Once the alarm is discharged the battery will be depleted
and the alarm will no longer function.
• Once the alarm has been discharged, it cannot be mounted
onto the mounting plate or reactivated.
11. Discharging / Killing The Battery
WARNING! Failure to DISCHARGE alarm as instructed prior to
disposal may create potential for lithium battery related fire or
hazard.
To Discharge The Alarm:
• Rotate the alarm counterclockwise to
remove it from the mounting plate.
• Use a screwdriver to break off the
plastic tab as indicated to allow to
discharge / kill the battery.
• After the tab is broken, use the
screwdriver to turn the slotted arrow
to the “DISCHARGE / KILL BATTERY”
location. This will discharge the
alarm, stop the low battery or end
of life “chirps” and render the alarm
safe for disposal by draining the
battery.
Plastic tab
To Next Page
Loading...
Need help?
General
