Kiddicare Chloe - User Manual

To Next Page

Chloe

Cot bed

Kiddicare

Club Way,

Cygnet Park,

Hampton,

Peterborough,

Cambridgeshire PE7 8JA

Customer Care: hello@kiddicare.com

care

Safety

Warning: Do not use the cot if any part is broken, torn or missing and use only spare parts approved by

the manufacturer.

Warning : Do not leave anything in the cot or place the cot close to another product, which could provide

a foothold or present a danger of suocation or strangulation, e.g. strings, blind/curtain cords, etc.

Warning: Do not use more than one mattress in the cot.

Warning: Be aware of the risk of open res and other sources of strong heat, such as electric bar res, gas

res, etc. near the vicinity of the cot.

• The base can be adjusted in height in cot mode, but the lowest position is the safest and should

always be used in that position as soon as the baby is old enough to sit up.

• This product is suitable for a mattress of 1400mm in length and 700mm in width.

• The length and width of the mattress shall be no less to ensure the gap between the mattress and

the sides and ends does not exceed 30mm.

• The thickness of the mattress shall be such that the internal height (surface of the mattress to the

upper edge of the cot frame) is at least 500mm in the lowest position of the cot base and at least

200mm in the highest position of the cot base.

• The bed mode is suitable for a child from 18 months old to 4 years old.

• Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not

be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or

cords. It should be placed either tight to any wall or have a gap of 300mm between the wall and

the side of the bed.

• The bed can be carefully dismantled for storage and transportation.

• To prevent injury from falls the cot should no longer be used for the child once they are able to

climb out of the cot.

•

This product conforms to: BS EN 716-1: 2008 + A1: 2013 and BS 8509: 2008 + A1: 2011

Maintenance

All assembly ttings should be tightened properly and should be checked regularly and

re-tightened as necessary.

Cleaning

Your cot can be cleaned by wiping with a damp cloth and drying with a soft clean cloth.

Do not use abrasives, bleach, alcohol or ammonia based household polishes.

IMPORTANT:

KEEP FOR FUTURE REFERENCE,

READ CAREFULLY

All manuals and user guides at all-guides.com

all-guides.com

Need help?

Do you have a question about the Kiddicare Chloe and is the answer not in the manual?

This document is a user manual for the Chloe Cot Bed, a versatile piece of nursery furniture designed to grow with a child from infancy through early childhood.

Function Description

The Chloe Cot Bed functions primarily as a cot for infants and can be converted into a bed suitable for a child from 18 months up to 4 years old. This dual functionality allows the product to adapt to the child's developmental stages, providing a safe sleeping environment at each stage. The cot mode offers adjustable base heights, with the lowest position being the safest once the baby can sit up. The conversion to a bed extends the product's lifespan, offering a familiar sleeping space as the child transitions from a cot.

Important Technical Specifications

Mattress Compatibility: The cot bed is designed for a mattress with a length of 1400mm and a width of 700mm. It is crucial that the mattress dimensions ensure the gap between the mattress and the cot sides and ends does not exceed 30mm for safety.
Mattress Thickness and Internal Height: The mattress thickness must allow for specific internal heights:
- At least 500mm from the mattress surface to the upper edge of the cot frame when the cot base is in its lowest position.
- At least 200mm from the mattress surface to the upper edge of the cot frame when the cot base is in its highest position.
Age Suitability (Bed Mode): The bed mode is suitable for children aged 18 months to 4 years old.
Safety Standards: The product conforms to the following safety standards:
- BS EN 716-1: 2008 + A1: 2013
- BS 8509: 2008 + A1: 2011
Parts List: The manual details the components required for assembly:
- Main Parts:
  - 1a x 2 (presumably cot ends/sides)
  - 1b x 2 (presumably cot ends/sides)
  - 2 x 2 (presumably cot sides/rails)
  - 3 x 1 (presumably cot base)
- Fittings:
  - A x 16 (screws/bolts, 60mm length)
  - B x 16 (barrel nuts/connectors)
  - C x 1 (tool, likely an Allen key)

Usage Features

Adjustable Base Height: The cot base can be adjusted to different heights. The lowest position is recommended for safety once the baby is old enough to sit up, preventing them from climbing out.
Convertible Design: The primary usage feature is its ability to convert from a cot to a child's bed, extending its utility over several years.
Safety Warnings: The manual emphasizes several critical safety warnings:
- Do not use the cot if any part is broken, torn, or missing. Only use spare parts approved by the manufacturer.
- Avoid leaving anything in the cot or placing the cot close to other products that could provide a foothold or pose a risk of suffocation/strangulation (e.g., strings, blind/curtain cords).
- Do not use more than one mattress in the cot.
- Be aware of the risk of open fires and other strong heat sources (electric bar fires, gas fires) near the cot.
- The cot should no longer be used once the child is able to climb out to prevent falls.
- When in bed mode, the child's bed should not be placed too close to other furniture, windows, blind cords, curtain pulls, or other strings/cords. It should be placed either tight against a wall or with a 300mm gap between the wall and the side of the bed.
Portability/Storage: The bed can be carefully dismantled for storage and transportation, indicating a design that allows for relatively easy breakdown and reassembly.

Maintenance Features

Assembly Fittings: All assembly fittings should be properly tightened during initial setup and regularly checked and re-tightened as necessary to ensure structural integrity and safety.
Cleaning: The cot can be cleaned by wiping it with a damp cloth and then drying it with a soft, clean cloth.
Cleaning Product Restrictions: It is explicitly stated not to use abrasives, bleach, alcohol, or ammonia-based household polishes, as these could damage the finish or materials of the cot bed.