With the moving back rest (C) of the Cruiserfix 3, it can be assured that it rests
against vehicle seat back rest. Position the adjustable back rest of the vehicle
seat appropriately.
5.2 Seat location for universal installation
The Cruiserfix 3 child restraint system (A) can be installed on any seat of vehicles
equipped with a 3-point vehicle seat belt system (Fig. 6).
The Cruiserfix 3 can also be used on rear-facing vehicle seats which are equipped
with a 3-point vehicle seat belt system (Fig. 6).
* If the vehicle manufacturer permits child restraint systems on the front pas-
senger seat, the seat should be moved to the rear-most position.
When you install the Cruiserx 3 in universal mode (without
k-x
+
), the connectors (E) must be retracted.
5.3 Seat location for semi-universal installation
Semi-universal installation of the child restraint system (A) is only possible in
vehicle seat positions which are equipped with ISOFIX anchorage points. The
Cruiserfix 3 can be connected to these ISOFIX anchorage points with the k-fix
+
connectors (E).
The Cruiserfix 3 child restraint system (A) can be installed in vehicles and on
seats which are listed in the type list.
The type list is continuously updated. The latest version can be found online at
http://www.kiddy.de/vehicletypelist
The manufacturer recommends the semi-universal installation of the child
restraint system (A) with the k-fix
+
connections (E) when possible.
To Next Page
Loading...
