8
5.3 Seat for semi-universal installation
Semi-universal installation of the child restraint system is only possible on
car seats fitted with ISOFIX anchors. With the aid of the k-fix connectors, the
kiddy smartfix can be securely fastened to the body of the vehicle by using
these ISOFIX anchor points.
The child restraint system (A) kiddy smartfix can be installed in cars and on
seats that are mentioned in the list of approved vehicles.
This list is updated regularly, for the latest version, see
http://www.kiddy.de/content/files/smartfix.pdf
The manufacturer recommends, if possible, semi-universal installati-
on of the child restraint system (A) with the k-fix connectors.
6. Semi-universal installation in vehicle with k-fix
Stick both guide funnels (G) onto the ISOFIX anchor fittings between the seat
and backrest of the vehicle seat (Fig. 7). The funnels (G) are available as
accessory and will help to increase the comfort while installation.
Now press the release button (L) in the front under the leg extension (K)
(Fig. 8; Point 1).
The k-fix connectors (E) will now automatically extend from the back of the
seat (J).
Test whether the connector hooks are opened by pushing the two release
mechanisms (N) forward (Fig. 9).
When the lock indicators (O) do not show "green", the connector hooks are
open.
Place the kiddy smartfix on a car seat that allows for semi-universal
installation (Section 5.3) and adjust the car seat if necessary as
described in Section 5.1.
ENG
To Next Page
Loading...
