Kieback&Peter GmbH & Co. KG
Tempelhofer Weg 50, 12347 Berlin/Germany
Telefon: +49 30 60095-0, Telefax: +49 30 60095-164
www.kieback-peter.de, info@kieback-peter.com
Datasheet 2.50-40.051-01-EN
SBM51/01 Gateway for Grundfos Pump Systems
Issue 2008-05-08
A
Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen
voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения
-
A változtatások jogát fenntartjuk -
保留未粳通知而改动的权力
Product description
SBM51/01 Gateway for Grundfos Pump Systems
Application
The SBM51/01 Gateway for Grundfos Pump Systems integrates bus-ca-
pable pumps into the DDC3000 and DDC4000 automation and control
systems.
Pumps with a Grundfos bus are supported, e.g. the UPE2000, TPE2000,
and Magna series. One SBM51/01 integrates a maximum of 8 pumps.
The switch cabinet bus is used to communicate with the DDC system.
Contents Page
Information about the product description .........................................................................................................2
Safety instructions ...........................................................................................................................................2
Qualified technicians........................................................................................................................................2
Item....................................................................................................................................................................3
Technical data .................................................................................................................................................3
Dimensions......................................................................................................................................................3
Connection.......................................................................................................................................................3
Mounting ............................................................................................................................................................5
Commissioning ..................................................................................................................................................5
Setting the switch cabinet bus address ...........................................................................................................5
Switching on the power....................................................................................................................................6
To Next Page
Need help?
General
