Need help?Do you have a question about the Kikusui PLZ-3WH Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Cooling Method | Forced Air Cooling |
| Series | PLZ-3WH |
| Type | Electronic Load |
| Operating Modes | CC, CV, CR, CP |
| Frequency | 50/60 Hz |
| Interface | RS232C |
| Current Measurement Accuracy | 0.1% + 0.1% F.S. |
General safety guidelines for qualified personnel operating the unit.
Defines the intended applications and operational limits of the product.
Precautions regarding power source, voltage selection, and fuse rating.
Guidance on replacing fuses with correct specifications.
Warning against removing the external cover to avoid hazards.
Safety guidelines for proper installation and grounding.
Safety measures and procedures for moving the equipment.
Safety checks and procedures before and during product operation.
Safety considerations during maintenance and inspection tasks.
Information regarding internal service and authorized personnel.
Introduces the PLZ-3WH series as a multifunctional, reliable electronic load unit.
Highlights key features like constant power mode, high-speed operation, and sequence function.
Specifies manual applicability and version information for product support.
Instructions for verifying package contents and condition upon receipt.
Safety guidelines and handling procedures for moving the load unit.
Environmental and safety requirements for installing the unit.
Procedures for selecting AC input range, connecting cables, and grounding.
Identifies and describes controls and indicators on the front panel of the unit.
Details the connectors and switches located on the rear panel.
Explains the information shown on the display immediately after powering the unit on.
Covers fundamental operations like selecting functions and navigating menus.
Describes Constant Current, Resistance, Voltage, and Power modes.
Step-by-step guide for performing common operational tasks.
Details how to program, set up, and execute sequence operations.
Explains how to control the load unit using external signals and interfaces.
Guides on connecting and operating multiple load units in parallel.
Configuration steps for GPIB, RS-232C, and MCB interfaces.
Defines the structure for commands, queries, and messages.
Lists and explains the available commands for remote control.
Details the meaning of bits within status and control registers.
Explains the relationship between registers, SRQ, and the status byte.
Provides a list of error messages and their corresponding causes.
General procedures for keeping the unit in good working condition.
Detailed instructions for calibrating the load unit's performance.
Information on how to obtain repair services from the manufacturer.
Comprehensive list of electrical characteristics and performance metrics.
Physical specifications including size and weight of the load units.
Lists standard accessories and optional items available for the product.
Describes optional hardware like remote controllers and interface boards.
A comprehensive list of error messages with their causes and remedies.
Provides templates and guidelines for creating sequence programs.
A table summarizing functions available across different operating modes.
Includes example code snippets for controlling the unit via GPIB and RS-232C.
To Next Page
