STEP 4:
Turn the seat cushion upright and align the center hole of the
seat plate over the lift, then push the seat cushion down onto the lift
rmly until the connection is secure.
H
C
E-mail: service@killabee-gaming.com Web: www.killabee-gaming.com
6
ASSEMBLY INSTRUCTIONS
STEP 3 :
Align the seat plate to the bottom of the seat cushion, make
sure that the front of the seat plate is facing the front of the seat cushion.
Attach the seat plate to the seat cushion using four M6X20mm bolts,
tighten all the bolts with the wrench.
H
E
816
To Next Page
Loading...
