Kilner Fridge Dispenser User Manual

1. When rst receiving
your Kilner
®
Fridge
Dispenser, the spigot/
tap will be loose for safe
transit. This must be
tightened before use.
2. Wash with warm soapy water before use. After lling the dispenser with liquid,
the lid needs to be securely fastened carefully to ensure there are no leaks or drips.
3. Tighten the spigot
carefully ensuring it is
positioned 90 degrees to
the Kilner
®
logo.
4. Hand tightening
is adequate. Over-
tightening will cause the
silicone washer to buckle
and distort. This will
cause the spigot/tap
to drip.
O
O
P
P
P
P

Kilner Fridge Dispenser Specifications

General

Brand	Kilner
Model	Fridge Dispenser
Category	Dispenser
Language	English

Summary

Kilner Fridge Dispenser Setup and Usage

Initial Spigot Assembly

Ensure the spigot/tap is securely tightened before first use for safe transit.

Cleaning and Leak Prevention

Wash with soapy water. Securely fasten lid after filling to prevent leaks or drips.

Spigot Alignment

Tighten the spigot to ensure it is positioned 90 degrees to the Kilner® logo.

Correct Tightening vs. Over-tightening

Hand-tighten adequately. Over-tightening distorts the washer and causes drips.

Lid Seal Integrity

Verify the lid's silicone ring is flat and undistorted to prevent damage.

Lid Seating and Placement

Place the lid carefully, ensuring the seal sits flat on the glass rim.

Securing the Dispenser Lid

Apply downward pressure on the lid while tightening the screw band for a secure seal.

Final Spigot Position Check

Confirm the spigot/tap is closed, central, and facing the correct direction.