Need help?Do you have a question about the Kilsen KFP-AE1(-S) and is the answer not in the manual?
General| Sounder Circuits | 1 |
|---|---|
| Frequency | 50/60 Hz |
| Storage Temperature | -20°C to +60°C |
| Protection Class | IP30 |
| Type | Conventional Fire Alarm Control Panel |
| Zones | 1 |
| Power Supply | 230V AC |
| Battery Backup | 12V/7Ah x 2 |
| Input Voltage | 230V AC |
| Humidity | 95% RH, non-condensing |
| Enclosure Material | ABS |
Covers manual introduction, firmware compatibility, and limitation of liability.
Explains the panel's front interface, controls, LCD, and indicators.
Covers electrical safety precautions and the cabinet/PCB layout.
Step-by-step guide for mounting the control panel cabinet on a wall.
Details recommended cables, loop, input, output, and power supply connections.
Details configuration options for panel settings, communication, and disable/enable features.
Guides installers through panel, ID, regional, and Firenet configuration.
Details autosetup, loop device, address, and zone configuration.
Covers quarterly and annual inspection checks and cleaning procedures.
Details battery types, fault indications, and replacement procedures.
To Next Page
