Kimo Direct Hometrainer - Page 22

COUNTDOWN FUNCTIE:
TIME:
Displays the time of your training session.
SPEED: Displays the current speed.
DISTANCE: Displays the distance you have cycled.
CALORIES: Displays the approximate number of calories
burned.
Displays the total accumulated distance. If you
press RESET this will not reset this number.
Removing the batteries will reset the odometer.
PULSE: Press MODE until the meter points to PULSE.
Before measuring your pulse, place your
palms on both contact surfaces. The
monitor displays your current heart rate in beats
per second.
During the heart rate measurement process, the
measured value are higher than the virtual one
frequency during the first 2 to 3
seconds, then it will return to the
normal level. The measured value cannot be
are considered as a basis for medical
therapy.
The meter has a time countdown function,
distance and calories. To use the countdown f
function, press MODE to select TIME,
DISTANCE or CALORIES. Press
SET to set the value. You can now
start cycling. The meter counts down from the
value you have set. When the
countdown is completed, it will automatically start
counting up from 0.
10
COUNTDOWN
FUNCTION
TIME
SPEED
DISTANCE
CALORIES
ODOMETER
PULSE