EasyManua.ls Logo

Kimo QM-13809S-T-20 User Manual

Kimo QM-13809S-T-20
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION MANUAL
20-Volt
Lithium-ion
Cordless Drill Driver
Kimo-support@kimotools.com
Catalog Number: QM-13809S-T-20
IMPORTANT: Read Before Using
Question and Answer IconNeed help?

Do you have a question about the Kimo QM-13809S-T-20 and is the answer not in the manual?

Kimo QM-13809S-T-20 Specifications

General IconGeneral
BrandKimo
ModelQM-13809S-T-20
CategoryDrill
LanguageEnglish

Summary

Specifications and Safety Warning

Important Safety Warning for Usage

Only use genuine KIMO battery cartridges and chargers to prevent injury or fire.

Safety Warnings and Guidelines

General Power Tool Safety

Follow all warnings and instructions to prevent electric shock, fire, or serious injury.

Work Area & Electrical Safety

Maintain a clean area and avoid wet conditions to prevent accidents and electric shock.

Personal Safety Precautions

Stay alert, use PPE, prevent unintentional starting, and dress properly for safe operation.

Safety, Service, and Battery Care

Power Tool Use and Care

Use the correct tool, maintain it, and store it safely away from children.

Battery Tool Use and Care

Recharge with specified chargers, use correct battery packs, and avoid shorting.

Tool Service and Maintenance

Have tools serviced by qualified personnel and keep them clean and dry.

Battery Cartridge Safety

Handling and Storage Precautions

Handle battery cartridges carefully, avoid damage, and store properly to prevent fire or explosion.

Save Instructions & Battery Care

Maintaining Maximum Battery Life

Charge before fully discharged, use room temperature, and recharge periodically.

Tool/Battery Protection System

System protects tool/battery from overload, overheat, and overdischarge.

Battery Status Indicators

LED indicators show remaining battery charge level.

Battery Charging and Installation

Charging Indicator Status

Indicators show charging, charged, or short-circuited battery status.

Installing the Battery Pack

Insert battery until it clicks, ensuring it is fully seated and latched.

Removing the Battery Pack

Press the slide button and pull the pack out of the tool.

Tool Components and Accessories

Identification of Tool Parts

Diagram labeling key components like chuck, switches, and battery.

Included Accessories List

Lists items like drill bits, extension bar, and carrying bag.

Installation Procedures

Installing/Removing Drill Bit

Use keyless chuck to tighten or loosen drill/driver bits.

Installing the Hanging Hook

Attach hook to tool housing groove for temporary hanging.

Adjustments and Settings

Reversing Switch Operation

Set switch for clockwise or anticlockwise rotation; use when tool is stopped.

Adjusting Speed Settings

Use slide switch for low/high speed; adjust when tool is off.

Adjusting Torque Settings

Use collar to set torque from 0-21; clutch slips at set levels.

Operating the Drill Driver

Proper Handling and Switch Action

Hold firmly, squeeze trigger to operate; tool has a brake.

Mode Selection

Choose between Hammer, Drill, and Driver functions using the collar.

Screwdriving Operation

Set torque, ensure bit is straight, and release trigger when clutch engages.

Drilling Operation

Set to drilling mode; use guide screws for wood, lubricant for metal.

Hammering Operation

Set to drilling mode for hammering function; use with caution.

Warranty Information

KIMO Product Warranty

Covers defects in material/workmanship for 2 years; excludes normal wear and misuse.