Kinco MK Series User Manual

Kinco-MK
User Manual
1
CONTENT
Chapter 1 General Introduction ................................................................................................... 3
1.1 Summary ............................................................................................................................ 3
1.2 Product List ........................................................................................................................ 3
1.3 Environmental Condition ...................................................................................................3
1.4 specification ........................................................................................................................5
1.4.1 display specification .................................................................................................... 5
1.4.2 PLC specification .........................................................................................................6
1.4.3 Appearance ............................................................................................................... 7
1.4.4 Dimension .................................................................................................................8
Chapter 2 PLC Introduction ........................................................................................................ 9
2.1 Functions ............................................................................................................................ 9
2.1.1 CPU Status and LEDs ..................................................................................................9
2.1.2 USB Programming port ...............................................................................................9
2.1.3 Serial Communication Port ....................................................................................... 10
2.1.4 High Speed Counter and High Speed Pulse Output ..................................................11
2.1.5 Edge Interrupts ...........................................................................................................11
2.1.6 Data Retentive and Data Backup ...............................................................................11
2.1.7 Real-time Clock (RTC) ............................................................................................. 13
2.1.8 Backup Battery .......................................................................................................... 13
2.2 Wiring diagram .................................................................................................................14
2.3 Dimension ........................................................................................................................ 17
2.4 Technical Specification .................................................................................................... 17
Chapter 3 Software Introduction ............................................................................................... 19
3.1 HMI programming ........................................................................................................... 19
3.1.1 Create project .............................................................................................................19
3.1.2 Edit configuration . ................................................................................................. 21
3.1.3 download link for HMI manual ..............................................................................21

Kinco MK Series Specifications

General

Series	MK Series
Display Type	TFT LCD
Touch Panel Type	4-wire Resistive
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Communication Ports	Ethernet, RS232, RS485, USB
Power Supply	24V DC
Screen Size	7 inch
Resolution	800x480
Communication Ports Detail	1 x Ethernet, 2 x RS232, 1 x RS485, 2 x USB
Protection Level	IP65

Summary

Chapter 1 General Introduction

1.1 Summary

Overview of Kinco MK series HMI-PLC features and benefits.

1.2 Product List

Details of available Kinco MK series HMI-PLC models.

1.3 Environmental Condition

Specifies operating and storage conditions for Kinco MK series.

1.4.1 Display specification

Technical details of the display module for different models.

1.4.2 PLC specification

Technical details of the PLC module for different models.

1.4.3 Appearance

Visual description and image of the HMI-PLC unit.

1.4.4 Dimension

Physical dimensions and cutout sizes for the HMI-PLC units.

Chapter 2 PLC Introduction

2.1.1 CPU Status and LEDs

Explains CPU operating modes and status indicator LEDs.

2.1.2 USB Programming port

Details on using the USB port for PLC programming.

2.1.3 Serial Communication Port

Information on serial communication ports for PLC connectivity.

2.1.4 High Speed Counter and High Speed Pulse Output

Covers high-speed counters and pulse output features.

2.1.5 Edge Interrupts

Describes the edge interrupt function for input signals.

2.1.6 Data Retentive and Data Backup

Explains data retention and backup mechanisms.

2.1.7 Real-time Clock (RTC)

Details on the real-time clock and its functions.

2.1.8 Backup Battery

Information about the backup battery for RTC and RAM.

2.2 Wiring diagram

Diagrams illustrating the wiring connections for the PLC.

2.3 Dimension

Physical dimensions and cutout sizes for the PLC units.

2.4 Technical Specification

Detailed technical specifications for PLC inputs and outputs.

Chapter 3 Software Introduction

3.1 HMI programming

Guide to programming the HMI using Kinco DTools.

3.1.1 Create project

Steps for creating a new project in Kinco DTools.

3.1.2 Edit configuration

Instructions for editing project configurations.

3.1.3 download link for HMI manual

Provides a link to download the HMI manual.

3.2 PLC

Introduction to PLC programming and setup.

3.2.1 introduction

Introduction to PLC programming with Kinco DTools.

3.2.2 Install driver of USB programming port

Step-by-step guide for installing USB drivers.

3.2.3 High speed counter

Details on high-speed counter capabilities and configurations.

3.2.3.1 Operation Modes and Inputs of the High-speed Counters

Explains operation modes and input signals for HSCs.

3.2.3.2 Control Byte and Status Byte

Describes control and status bytes for high-speed counters.

3.2.3.3 Preset value (PV value) setting

Guide to setting preset values for high-speed counters.

3.2.4 How to use high speed pulse output

Guide to utilizing high-speed pulse output features.

3.2.4.1 High speed pulse output instruction

Instructions for high-speed pulse output operations.

3.2.4.2 How to use PLS instruction

Explains the usage of the PLS instruction for PTO/PWM.

3.2.4.2.1 High-speed Pulse Output Function of MK series

Details the high-speed pulse output functions of MK series.

3.2.4.2.2 PTO/PWM Register

Information on PTO/PWM registers and their configurations.

3.2.4.2.3 PTO Operations

Steps for configuring and operating PTO functions.

3.2.4.2.4 PWM Operations

Steps for configuring and operating PWM functions.

3.2.5 How to Use Position Control Instructions

Guide to using position control instructions.

3.2.5.1 How to Modify the Current Value of Position Control Instructions

Methods for modifying the current value in position control.

3.2.5.2 Can it change maximum output frequency when position control instruction is executing?

Discusses frequency changes during position control execution.

3.3 The use of analog quantities

Guide to using and configuring analog input/output channels.

3.3.1 Wiring diagram

Wiring diagram for analog input/output channels.

3.3.2 Measurement Ranges and The measured value Representation

Defines measurement ranges and value representation for analog signals.

3.3.3 Configuration in software

How to configure analog channels within the software.