Kinder Cameo He KHCL**RN

Need help?

Do you have a question about the Kinder Cameo He KHCL**RN and is the answer not in the manual?

Summary

Section 1 Information and Requirements

1.0 Appliance Information

Details specifications of the gas appliance, including injector type, pilot type, heat input, and gas rate.

1.1 Conditions of Installation

Outlines legal and regulatory requirements for installing gas appliances according to standards and regulations.

1.2 Flue and Chimney Suitability

Specifies requirements for conventional brick-built flues, lined chimneys, and fabricated flues for the appliance.

Section 2 Installation of Fire

2.1 Unpacking the Combustion Chamber

2.2 Preparation of the Combustion Chamber Opening (Into Studded Wall)

2.3 Preparation of the Combustion Chamber Opening (Into Existing Chimney Breast)

2.4 Securing the Fire to the Opening

2.5 Installation of the Gas Supply

Instructions for connecting the gas supply to the appliance, including pipe routing options.

Section 3 Assembling Fuel Bed and Commissioning

3.1 Fitting the Fuel-Bed Logset

Guide to correctly positioning the gravel and logs on the fuel bed for realistic appearance.

3.2 Making the Gas Connection & Checking for Gas Tightness

Procedures for making the final gas connection and performing a gas tightness test.

3.4 Lighting the Appliance

Guides the user to identify their remote control system before lighting procedures.

3.4.3 Lighting the Appliance - SIT ACS2 T Remote Control

Detailed steps for lighting and operating the appliance using the SIT ACS2T remote.

3.4.5 Operation of the Fire in AUTOMATIC mode

Explains how to use the thermostat function for automatic temperature control.

3.4.6 Operation of the Fire in PROGRAMME FUNCTION mode

Details how to set timed operating schedules using the programmable function.

3.5 Lighting the Appliance - Mertik Maxitrol GV60 Remote Control

Detailed steps for lighting and operating the appliance using the Mertik Maxitrol GV60 remote.

3.5.2 Operation of the Fire in “TEMPERATURE” mode

Explains how to use the thermostat function for automatic temperature control.

3.5.3 Operation of the Fire in “TIMER” mode

Details how to set timed operating schedules using the programmable function.

3.7 Checking for Clearance of Combustion Products

Procedure for testing flue performance and ensuring safe evacuation of combustion gases.

Section 4 Maintenance

4.1 Removing the Burner Assembly

Step-by-step guide for safely removing the burner assembly from the appliance.

4.2 Removing the Control Valve Sub Assembly

4.4 Removing the Pilot Assembly

Section 5 User Instructions

5.1 Installation Information

5.3 Spillage Monitoring System

Explanation of the safety system that shuts down the fire if flue evacuation is compromised.

5.4 Lighting the Appliance (SIT ACS2 T Remote)

Instructions for lighting and operating the appliance with the SIT ACS2T remote.

5.4.3 Lighting the Appliance - SIT ACS2 T Remote Control

Detailed steps for lighting and operating the appliance using the SIT ACS2T remote.

5.4.5 Operation of the Fire in AUTOMATIC mode

5.4.6 Operation of the Fire in PROGRAMME FUNCTION mode

5.4.10 Turning the Product Off in Remote Malfunction

5.5 Lighting the Appliance (Mertik Maxitrol GV60 Remote)

Instructions for lighting and operating the appliance with the Mertik Maxitrol GV60 remote.

5.5.2 Operation of the Fire in “TEMPERATURE” mode

5.5.3 Operation of the Fire in “TIMER” mode

5.6 Cleaning

5.6.2 Cleaning the Fuel Bed

5.7 Removal & Re-fitting the Fuel-Bed Logset

5.8 Removing; Re-fitting the Glass Frame Assembly