Need help?Do you have a question about the Kindermann Klick & Show and is the answer not in the manual?
General| Product Type | Wireless Presentation System |
|---|---|
| Video Output | HDMI |
| Wireless Technology | Wi-Fi |
| Supported Resolutions | Up to 1080p |
| Security Protocols | WPA2 |
| Number of Simultaneous Connections | Up to 4 devices |
| Supported Operating Systems | Windows, macOS, iOS, Android |
| Compatibility | Projectors, Displays, Interactive Whiteboards |
| Maximum Resolution | 1920x1080 |
| Power Supply | USB powered |
Diagram illustrating the Klick & Show system's operational flow and connectivity.
Details how the Klick & Show system integrates into wired and wireless networks, including standard setup and integration with separate access points.
Overview of physical ports, connectors, and buttons on the Klick & Show devices.
Details the connectors and indicators located on the front of the Base-unit.
Describes the various ports and connectors found on the rear of the Base-unit.
Details the functionality and components of the Klick & Show Sensor-button.
Describes the main interface displayed on the screen when the system is active.
Describes the main interface displayed on the screen when the system is active.
Explains the system's default settings after performing a factory reset.
Information on how to access the user manual and support resources for the device.
General introduction to the installation process for the Klick & Show Base-unit.
Explains different ways to physically install the Base-unit, including table and wall mounting.
Guidelines for optimal positioning of antennas to ensure reliable wireless signal strength.
Guide on connecting mobile devices wirelessly to the Klick & Show system.
Steps to activate and use the system's portable Wi-Fi hotspot feature.
Instructions for connecting mobile devices via a wired LAN network.
Detailed steps for mirroring PC or Laptop screens to the main display.
Guide on mirroring screens from mobile devices (Android/iOS) to the main display.
Configuration options related to the Ethernet network interface of the Base-unit.
How to view and configure the Base-unit's IP address settings.
Information on the Base-unit's unique MAC address for network identification.
Settings for configuring proxy servers and IP address management.
Configuration details for PPPoE internet connection setup.
Settings for enabling and managing the system's Wi-Fi hotspot and tethering capabilities.
How to activate or deactivate the device's Wi-Fi hotspot functionality.
Option to display or hide Wi-Fi network name and password on the main screen.
Guide to configuring SSID, security, frequency, channel, and password for the Wi-Fi hotspot.
Settings for automatic generation and change of Wi-Fi hotspot passwords for security.
Using the built-in tool to analyze Wi-Fi environment for optimal channel selection.
Common Wi-Fi connection issues and solutions for the Klick & Show system.
Enabling and using sub-windows to preview content from connected sensor buttons.
Configuring the system to automatically copy the starter program to a USB stick.
Settings for automatically switching the system to power-saving mode after inactivity.
Adjusting the image quality for Apple devices using AirPlay mirroring.
Selecting the optimal video resolution for the HDMI output.
Configuring automatic switching between HDMI input sources.
Customizing the background image displayed on the Home screen.
Adjusting the audio volume output from the system.
Allowing devices on the LAN to discover and connect to the Base-unit.
Enabling or disabling the ability for attendees to remotely view the main screen.
Options for clearing stored meeting data after use.
Procedure for changing the administrator password for menu access.
Instructions for sharing the desktop content from a PC or Laptop.
Specific steps for transmitting PC desktop content from Windows operating systems.
Specific steps for transmitting PC desktop content from macOS operating systems.
Guide on using Apple's AirPlay feature for wireless screen mirroring from iOS devices.
Instructions for downloading and using the WirelessMedia app for iOS devices.
Instructions for downloading and using the WirelessMedia app for Android devices.
How to check the current firmware versions of the Base-unit and connected devices.
To Next Page
