To Next Page
J
Jermaine McclainAug 11, 2025
How to fix no video transmission via WHD on Kindermann QuickPresent air Projector Accessories?
- AAaron LutzAug 11, 2025
If there's no video transmission via WHD, here are some things to check: * Make sure the transmitter is paired with the receiver. If not, pair them according to the instructions. * Ensure there is a direct line-of-sight and the correct distance between the transmitter and receiver, since a large distance or obstacles can cause this issue. * Verify that a video signal is available at the input of the QuickPresent air selection. Check the video source and input. * Confirm the 60GHz receiver is getting enough current (at least 2A) from the USB voltage source. Use a correct USB voltage source. * As an alternative, use local HDMI output instead of transmission path.
General