Kinesis Advantage 360 KB360 - 1.0 Read Me First; 1.1 Health and Safety Warning; 1.2 Preserving Your Warranty Rights

6
Macro Examples:
1. Pause key performs “Hi” with a capital H: {pause}{rctrl}>{-lshft}{h}{+lshft}{i}
2. Hotkey 4 + Left Ctrl performs “qwerty” at speed 9: {lctrl}{hk4}>{s9}{q}{w}{e}{r}{t}{y}
3. Hotkey 1 increases the volume 3 notches: {hk1}>{x3}{vol+)
4.8 Tap and Hold Actions
With Tap and Hold, you can assign two unique actions to a single key based on the duration of the keypress.
Designate the Position Token in the appropriate layer, then the Tap action, then the timing delay from 1 to
999 milliseconds using the special Tap and Hold token ({t&hxxx}), then the Hold Action. Due to inherent
timing delays, Tap-and-Hold is not recommended for use with alphanumeric typing keys. Not all key actions
support Tap-and-Hold.
Note: For most applications, we recommend a timing delay of 250ms.
Tap and Hold Example:
• Caps performs Caps when tapped and Esc when held longer than 500ms: [caps]>[caps][t&h500][esc]
5.0 Direct Programming RGB LEDs
The 360 features 3 programmable RGB LEDs on each key module. The nine default lighting effects are
saved as separate .txt files in the “lighting” subfolder on the v-Drive. The default assignments are shown
below. Note: If the file is blank, the indicators will be disabled.
5.1 Define your Indicator
The 6 indicators are defined with a basic position token
• Left Module Left LED: [IND1]
• Left Module Middle LED: [IND2]
• Left Module Right LED: [IND3]
• Right Module Left LED: [IND4]
• Right Module Middle LED: [IND5]
• Right Module Right LED: [IND6]
5.2 Define your Function
A variety of functions are supported and more may be added in the future.
• Disable LED: [null]
• Active Profile: [prof]
Right Key Module
Le = Num Lock (On/Off)
Middle = Scroll Lock (On/Off)
Right = Layer (Base, Kp, Fn1, Fn2, Fn3)
LeŌ Key Module
Le = Caps Lock (On/Off)
Middle = Profile (0-9)
Right = Layer (Base, Kp, Fn1, Fn2, Fn3)