Kinesis Freestyle2 Blue User Manual

Kinesis® Freestyle2™ Blue™
Multichannel™ Bluetooth® Keyboard for Mac® (KB800MB-BT)
Overview of features
The Freestyle2 Blue keyboard can be used as a cordless one-piece, low-force keyboard with productivity-enhancing driverless hot keys and a
long-lasting rechargeable battery. In addition, the removable Pivot Tether™ allows the choice of adjustable splay or complete separation of
keying modules connected only by the linking cable. Like other Bluetooth keyboards, it creates a secure wireless connection to your blue-
tooth-ready computer, tablet, or phone. However, the Freestyle2 Blue also offers a powerful new Multichannel™ productivity feature which
allows instant switching between up to three devices.
Compatibility
This keyboard utilizes battery-efficient Bluetooth 3.0 technology and will operate on virtually any computer with built-in Bluetooth (versions
1.0 to 4.0). Inexpensive USB Bluetooth dongles are also widely available for systems such as desktop computers which may not have on-
board Bluetooth. No user-installed drivers are required, so you can get started immediately by following the connection instructions below. In
general, the keyboard will work with all recent versions of OS X (10.4 and newer) and iOS, though some of the special driverless hot keys
will not work in iOS. Additional connection tips may be found under “Support” at kinesis.com.
Health Caution
Improper keyboard and/or mouse use may contribute to painful and permanent injuries. Read the Health and Safety details on the bottom
label of the keyboard. If you experience pain, weakness, numbness, or tingling while or after using your computer, consult a qualified health
professional for advice.
Get to know your keyboard
The figure below shows the layout of the keys, with special Bluetooth features identified by numbers. Familiarize yourself briefly with these
special features before charging or connecting your keyboard (details on the following page):
1. Micro-USB charging port.
2. On-off switch, located on back edge of the keyboard. If you look at the switch from the back, it shows green when on and
red when off.
3. Connect button on the underside of the keyboard, aligned with the on/off switch. It is used for creating the initial secure
connection with computer, tablet, or phone. When pressed, all the channel LEDs flash until the desired channel is selected.
Do not use this for switching between channels.
4. LEDs monitor Bluetooth channels (blue), capslock status (green), and power/battery status (green/red). PWR shows
flashing green when charging and solid green when fully charged. Battery shows steady green when remaining charge
exceeds 1%, flashing red when 1% or less.
5. Multichannel channel selection keys (when “fn” is held down).
Freestyle2 Blue keyboard for Apple devices (OS X and iOS)
Special Bluetooth features (additional keyboard features described on page 3):

Kinesis Freestyle2 Blue Specifications

General

Connection Type	Bluetooth
Split Design	Yes
Key Switch Type	Membrane
Battery Life	Up to 6 months
Key Layout	QWERTY
Model	Freestyle2 Blue
Category	Keyboard
Type	Ergonomic
Battery Type	2x AAA
Color	Black
Compatibility	Windows, Mac

Summary

Overview of Kinesis Freestyle2 Blue Keyboard

Keyboard Features

Highlights include a cordless, low-force design, rechargeable battery, and Multichannel productivity.

Getting Started with Your Keyboard

Keyboard Layout and Special Features

Introduces the keyboard layout and identifies special Bluetooth features for easy familiarization.

Compatibility and System Requirements

Details Bluetooth 3.0 compatibility with OS X and iOS, and requirements for older systems.

Health and Safety Precautions

Advises users to read health and safety details to prevent potential injuries from keyboard use.

Connecting Your Keyboard

Charging the Battery

Instructions for fully charging the keyboard's rechargeable battery before initial use for extended periods.

Initial Device Connection

Step-by-step guide for turning on, connecting, and pairing the keyboard with a device via Bluetooth.

Connecting to Multiple Devices

Guidance for connecting to a second or third device and switching between previously paired devices.

Battery Status and Charging

Information on battery life, LED indicators for battery status, and the charging process.

Keyboard Usage and Customization

Keyboard Ergonomics and Separation

Details on separating keying modules using the Pivot Tether for adjustable splay or complete separation.

Special Key Functions

Explains special left-side hot keys and top-row driverless hot keys for enhanced productivity.

Accessories, Warranty, and Compliance

Optional Accessories

Lists optional kits for adjusting keyboard tenting angles and palm supports.

Warranty and Technical Support

Provides information on the two-year limited warranty and how to contact Kinesis Technical Support.

Regulatory and Safety Information

Includes FCC, Industry Canada, CE, RoHS compliance, and battery disposal guidelines.