<Off / On> <On / Off>
In the Box
- Keyboard (KB360-PRO-XXX)
- 2 Charging Cables (USB-C to USB-A)
- Bridge Connector
- Extra Keycaps & Keycap Removal Tool
System Requirements
Computer with full-size USB-A port or Bluetooth®, and Windows
7-12®, macOS®, Linux®, or Chrome® operating system
Note: If your computer does not have integrated Bluetooth, you
may use a 3rd party Bluetooth dongle which is sold separately.
Battery
Each keyboard module is equipped with a rechargeable Lithium-Ion
battery. Turn on battery power by sliding the switch on the back of
each module away from the USB port. Batteries will automatically
charge whenever the module is connected via a charging cable.
Getting Started - Wired USB
Use one of the included cables to connect the left module to your
computer. Then power the right module by: 1) using the other cable
to connect it to the computer, or 2) turning on battery power via the
slide switch. Note: Anytime the left module is connect to a
computer keystrokes will be sent to that device over USB.
Getting Started - Wireless Bluetooth
Toggle both modules to battery power. Navigate to your computer’s
Bluetooth menu and locate the “Adv360 Pro” device and select
“Connect”. If the connection is successful, the Profile LED will go
solid white to indicate Profile 1 has been paired. Note: Exact
Bluetooth pairing will vary based on device and O/S, so consult your
computer’s operating manual or that of your Bluetooth dongle.
Linking Between Modules
The left and right modules always communicate wirelessly.
3
To Next Page
Loading...
