Graphical Programming
To access a graphical interface for reprogramming the keyboard,
visit the link below, authorize the App in GitHub, and then load your
personal Repository. From here you can create new layers, assign
new types of key behaviors (Note: ”&kp” is the default keypress)
and key codes, as well as create, edit, and assign basic macros.
When you have finished editing, click “Commit Changes” and follow
the instructions in this guide to download and install the firmware.
GUI: https://kinesiscorporation.github.io/Adv360-Pro-GUI/
Accessing the Bootloader and Installing Firmware Files
Each key module contains it’s own onboard flash storage which can
be accessed to install firmware files. With the respective key module
connected to a computer over USB, use the shortcuts below to
mount the removable drive named “Adv360 Pro”. Note: The
bootloader can also be accessed via a physical push button switch
using a paperclip (Consult the User’s Manual for details).
Left Module Bootloader: Mod + Hotkey 1
Right Module Bootloader: Mod + Hotkey 3
Install the downloaded firmware files by copying “left.uf2” to the
left drive first, and then by copying “right.uf2” to the right drive.
Note: Do not disconnect the cable until the update is complete.
8
To Previous Page
Loading...
