Kinetico 4060s with OverdriveMacrolite User Manual

10
Maintaining Your Water System
Your Kinetico water system is engineered to provide you with quality water
without requiring extensive maintenance. However, some routine maintenance
is necessary to keep your system working properly.
Changing the Filter
Your Kinetico system uses an in-line filter to remove solid material from the
inlet water supply. Periodically, the filter cartridge will require replacement.
is should occur when the water pressure in the home begins to gradually
decrease. e frequency of the filter change is determined by the amount of
water used and the solid material content of your water supply.
Procedure
1. Turn off the feed water to the filter by turning the by-pass valve
1
to the BY-
PASS position*.
2. Slowly turn the handle on the pressure relief valve
2
to the OPEN
position**. Allow at least one minute for system to depressurize and to
minimize spillage.
Open
Closed
Off
On
2
1
5
3
6
4

Kinetico 4060s with OverdriveMacrolite Specifications

General

Brand	Kinetico
Model	4060s with OverdriveMacrolite
Category	Water System
Language	English