Need help?Do you have a question about the King Canada CH-900C and is the answer not in the manual?
Parts related to the headstock assembly, including bearings, spindle, and associated hardware.
Components for the spindle, pulley, belts, and shifting mechanism.
Parts for the tool rest, its base, extensions, and locking mechanisms.
Components for the tailstock, including spindle, locking handles, and screw shafts.
Parts that form the main bed, extension beds, and the support stand legs and plates.
Components such as the motor, starting capacitor, power cord, switches, and switch boxes.
Miscellaneous hardware, bags, and manuals, including complete head and manuals.
Parts related to the headstock assembly, including bearings, spindle, and associated hardware.
Components for the spindle, pulley, belts, and shifting mechanism.
Parts for the tool rest, its base, extensions, and locking mechanisms.
Components for the tailstock, including spindle, locking handles, and screw shafts.
Parts that form the main bed, extension beds, and the support stand legs and plates.
Components such as the motor, starting capacitor, power cord, switches, and switch boxes.
Miscellaneous hardware, bags, and manuals, including complete head and manuals.
General| Motor Power | 3/4 HP |
|---|---|
| Spindle bore | 0.79 inches |
| Swing Over Bed | 9 inches |
| Distance Between Centers | 20 inches |
| Tailstock Taper | MT2 |
| Voltage | 110V |
| Swing over cross slide | 5 inches |
To Next Page
