Need help?Do you have a question about the King Canada KWL-1016C and is the answer not in the manual?
General| Swing Over Bed | 10" |
|---|---|
| Distance Between Centers | 16" |
| Motor Power | 3/4 HP |
| Voltage | 110V |
| Tailstock Taper | MT2 |
| Spindle Taper | MT3 |
Keep dated proof of purchase for warranty. Replacement parts are available at authorized service centers.
2-year warranty against defects. Excludes misuse, abuse, negligence, accidents, repairs, or lack of maintenance.
Comprehensive safety rules for all power tools, covering grounding, PPE, work area, and attire.
Crucial safety measures for lathe operation, including workpiece handling, tool control, and speed selection.
Detailed specifications for the KWL-1016C model, including power, dimensions, and spindle details.
Visual identification of major lathe parts via labeled diagrams (Figure 1 and 2).
Guidance on mounting the lathe on a workbench and ensuring it is perfectly level.
Requirements for power supply, grounding, and safe electrical connection practices.
Instructions for plugging in, using the on/off safety switch, and extension cord usage.
Procedures for mounting the 3" faceplate and installing/removing headstock and tailstock centers.
How to position the tool rest base and adjust the tool rest height for optimal turning.
Guidance on moving the tailstock along the bedway and locking the quill.
Procedure for changing spindle speed by adjusting belt positions on pulleys.
Information on lathe operations and basic maintenance for longevity.
To Next Page
