King Jim TEPRA PRO - Introduction

Introduction
Thank you for purchasing this label printer "TEPRA" PRO SR5900GS. Please read this user's manual
carefully before using this product. This document also serves as the product warranty certicate.
Please keep it for future reference and warranty claims.
●
Use "TEPRA" PRO tape cartridge with this printer.
●
Using this printer in close proximity to televisions, radios, or other digital receivers may cause
feedback noise.
●
Due to continuous improvement, actual product and product specications described in this manual
may di󰀨er or be changed without notice. Use this manual as a reference only.
•
About labels created by "TEPRA" PRO
Depending on the material of the surface or environmental conditions involved in the adhesion
of the tape, the glue from the label could stick to and damage surfaces without the possibility
for removal. This disclaimer releases us from any responsibility whatsoever for any damages or
loss this may cause.
•
Do not operate this product in any way not found in this manual. Doing so could cause an
accident or malfunction.
License agreement for open source software
For details of the license agreement for open source software, download TEPRA Label
Editor SPC10 from the KING JIM website (https://www.kingjim.co.jp/english/) and refer to the
"OSSLicense.pdf" le in the [License] folder.
• "KING JIM", "TEPRA" and P TAPE logo are trademarks of KING JIM CO., LTD.
• "iOS" and "App Store" are trademarks of Apple Inc.
• "Android" and "Google Play" are trademarks of Google LLC.
• "QR Code" is registered trademark of DENSO WAVE INCORPORATED in Japan and other
countries.
• Other company names and product names are trademarks or registered trademarks of the
respective companies.