King Kutter Rotary Mower User Manual

9
STEP 7
Using the right side lift arm as a lever, pull to the outside of the lift arm
bracket and inset bolt through lift arm and lift arm bracket. (See Figure I) In-
stall washer and nut. Place the lift pin in the larger of the (2) holes on the lift arm
brace and loosley attach the lift arm. Finally insert bolt, nut and washer to lower
section of lift arm support strap to lift arm bracket. (See Figure J)
STEP 8
Tighten all nuts and bolts.
Figure A Figure B
Figure C Figure D

King Kutter Rotary Mower Specifications

General

Brand	King Kutter
Model	Rotary Mower
Category	Lawn Mower
Language	English