T3 --- GSM 3G Senior Telecare
---GSM 3G Elderly Care Alarm System
Table of contents
1.Product details --------------------------------------------------------------------------3
2.Safety Directions --------------------------------------------------------------------------4
3.Product Schematic ------------------------------------------------------------------------5
4.Setting by PC software---------------------------------------------------------------7
5.Setting/Operating by SMS commands -------------------------------------------14
6.Add wireless sensors -----------------------------------------------------15
7.Hot T3 works for elderly?----------------------------------------------------------------16
8.Warranty -------------------------------------------------------------------------------17
General SMS Command List
To arm the T3, in this mode, any detector triggered will alarm.
To disarm the T3, in this mode, detector triggered will not alarm.
To switch ON the Siren output.
To switch OFF the Siren output
Inquiry the T3 Status and GSM Module IMEI Code.
*The commands should plus Password, the format is Password + SMS Command.
i.e.: default operate password is 1234, then you can send 1234AA to arm, 1234BB to disarm.
* The command body AA, BB, CC, DD, EE, etc must be Caps Lock.
This handbook has been designed as a guide to the installation and operation of K3 Panel.
Statements contained in the handbook are general guidelines only and in no way are designed to supersede the
instructions contained with other products.
We recommend that the advice of a registered electrician be sought before any Installation work commences.
The manufacturer, its employees and distributors, accept no liability for any loss or damage including
consequential damage due to reliance on any material contained in this handbook.
The manufacturer, its employees and distributors, accept no liability for GSM Network upgrading or SIMCard
upgrading due to the technology specifications contained in this handbook.
To Next Page
Loading...