21
Fig. 4
Fig. 5
Fitting and assembly
- Insert the appliance into the cabinet
space;
- open the oven door and fix the body of
the oven to the cabinet using four wood
screws of a suitable size for the holes
already made around the oven (see figs
4 and 5).
Where both an oven and a cooking hob are
being fitted, the electrical connection for
each of these appliances must be made
separately, both for electrical reasons and to
facilitate the frontal extraction of the oven.
Any extension leads needed should be made
out of cable suitable for carrying the
prescribed power.
FO 0039
FO 0986
To Next Page
Loading...