Do you have a question about the KING WiFiMax KWM1000 and is the answer not in the manual?
Brand | KING |
---|---|
Model | WiFiMax KWM1000 |
Category | Wireless Router |
Language | English |
Steps to attach antennas/cables and connect the unit to power.
Notes on using keyhole slots for wall mounting the unit.
Connect your smart device to the KING 5G or KING network via Wi-Fi settings.
Open a web browser to http://mykingwifi.com and navigate to WiFi Settings.
Change the Wi-Fi name and password for both 2.4GHz and 5GHz networks.
Tap the "Save" button to apply the customized network name and password.
Connect your devices to the personalized WiFi network name.
Navigate to Wireless Repeating settings and scan for networks.
Choose the desired upstream WiFi network from the scanned list.
Confirm reboot to activate the wireless repeating settings.
Position the antenna for maximum range and line of sight, avoiding obstructions.
Drill hole, route cable, connect KING Swift, seal connections with compatible sealant.
Steps for connecting through an OEM installed prewire enclosure, including sealing.
Solutions for no power, inability to find networks, or connection errors.
Tips for password entry, upstream network selection, and poor signal issues.
Guidance on router reboot issues and how to reset the device.
Technical details for the KING WiFiMax, including power, standards, and security.
Technical details for the KING Swift antenna, including band, gain, and dimensions.
Procedures for making warranty claims, obtaining authorization, and returning the product.
Conditions that void the warranty and limitations on liability and implied warranties.
FCC rules, cautions, and radiation exposure compliance for the device.
Canadian ICES-3/NMB-3 compliance, RF exposure, and band restrictions.
Approved antenna types, gain limits, and 5 GHz band restrictions.